Moz Q&A is closed.
After more than 13 years, and tens of thousands of questions, Moz Q&A closed on 12th December 2024. Whilst we’re not completely removing the content - many posts will still be possible to view - we have locked both new posts and new replies. More details here.
I need to whitelist the Google Analytics servers via IP Address. Any one know their server IPs?
-
Due to a walled garden situation, I need to input all the servers we should have access to via IP Address. We need to track the way our users are browsing within the garden, so I require all the IP addresses that Google Analytics would use. I tried googling it, but was not able to find any definitive answers.
Thank you in advance,
Heather
-
Indeed, if you want to whitelist a list of Google IPs, we'd be talking about a TON of IPs. To my knowledge, there doesn't seem to be a public list anywhere.
I'm afraid there is no good answer for your question.
Your best bet might be experimenting with an self-hosted Analytics package like Urchin.
-
Hi,
The reason we require the IP addresses is that we have all internet access completely shut down, so there is no way for our site to send out a call to Google Analytics each time a user loads the page unless the IP address of the google servers have been added to our whitelist, therefore allowing data out from our network to theirs.
I did a bunch of research after initially asking the question back in November and it apparently there are no specific IP ranges for just Google Analytics related servers (they are just part of the overall server farm). We would need to whitelist well over a 100,000 ip addresses based on the ranges I found.
Thank you,
Heather
-
Yes, I think we need this clarified as there are two things to be considered with Analytics - depending which method you want to use to verify your site you may need Googlebot to have access. There is another option in this case though - you could simply turn off the firewall, verify the site and then turn the firewall back on.
Of course Keri is quite right in that there is no need for crawlers to access the site for Analytics to work once verification has been completed as it uses javascript to send information from the browser.
The other question to be addressed though is "do you want any of the pages behind the firewall to be indexed?". If the answer is no, then the question will have been answered by the previous comments.
If the answer is yes, then you would need to whitelist the entire range to give googlebot(s) ongoing access.
Sha
-
Can you clarify if you're talking about Google Analytics, or about the google bot crawling the site itself?
-
I don't believe this is generally a problem, because traditionally googlebot doesn't use javascript that would trigger GA in the first place.
- topic:timeago_earlier,16 days
-
Hi Heather,
I think the closest you would get would be to run a Whois lookup for google.com, which will show you a series of IP address ranges that are associated with the domain.
While it will not give you the specific addresses for Analytics, it will also ensure that you are not blocking any of the various googlebots responsible for crawling, whatever job they do
Hope that helps,
Sha
Got a burning SEO question?
Subscribe to Moz Pro to gain full access to Q&A, answer questions, and ask your own.
Browse Questions
Explore more categories
-
Moz Tools
Chat with the community about the Moz tools.
-
SEO Tactics
Discuss the SEO process with fellow marketers
-
Community
Discuss industry events, jobs, and news!
-
Digital Marketing
Chat about tactics outside of SEO
-
Research & Trends
Dive into research and trends in the search industry.
-
Support
Connect on product support and feature requests.
Related Questions
-
Strange landing page in Google Analytics
Hello MOZ Community, The website in question is https://x-y.com/ When i looked at the landing pages report in GA , x-y.com is appended at the end of every URL like this. https://x-y.com/x-y.com When i open the above URL in GA interface, it shows page not found. This is obvious as there is no such URL.
Reporting & Analytics | Dec 1, 2019, 5:05 AM | Johnroger
The metrics like sessions, Users, Bounce rate all look good. In the property settings, The default URL is written like this http:// cell-gate.com (Please note that s is missing in property settings). But how is traffic tracked correctly How do i solve this problem. What settings should we change to make the landing pages report look ok Thanks0 -
UTM Links Showing Up as Separate Pages in Google Analytics
Hey everyone, I was just looking at landing pages in Google Analytics, and in addition to just the URL of the landing page, the UTM links are being listed as separate pages. Is this normal? I anticipated seeing the landing page URL and then using the secondary dimension to see source/medium. If this isn't normal, what would I check next?
Reporting & Analytics | Aug 22, 2017, 2:58 PM | rachelmeyer0 -
Google Analytics SEO Queries Not Showing
Hi All, This might be a silly question, but for all the properties I monitor in Google Analytics, I'm now showing no data for SEO Queries under Acquisition for the past 6 days. Normally I would expect a few day delay in queries, but nothing for 6 days is somewhat peculiar especially as it was functioning fine prior to November 12th. Does anyone have insight into what might be going on? Thanks! URaNMa3
Reporting & Analytics | Jan 23, 2016, 5:27 AM | amichaels0 -
Google Analytics and Bounce Rates Query - Should I block access from foreign countries ?
Hi , When I look at my google analytics for my UK Website, I can see alot of visits come from outside the UK , i.e Brazil and USA. Both of which give me almost 100% bounce rates from people visiting from there. I am wondering, if google looks at bounce rates with regards to ranking factors and should I therefore block access to my site from visitors outside the UK ?... Would this help increase my rankings ? Given that we only serve uk customers, I cant see any benefit of allowing non uk customers the ability to see the site . what does people think ? thanks pete
Reporting & Analytics | Feb 4, 2015, 3:26 PM | PeteC121 -
Google Analytics Real Time Not Working! :(
Hello Everyone, Today, the real time feature in my google analytics stopped working. I am able to see that traffic is visiting my site, but not in real time. The real time count is usually at 0. But, there are some instances where real time will come back online, but there will be only 1 unique visitor. At any given time, our website usually has 20 visitors or so..Has anyone encountered this issue? Where should i start looking for fixes? What are the possible problems? Thanks!
Reporting & Analytics | Jan 7, 2015, 7:30 AM | KarlMarxTheBear0 -
How can I use Google Analytics to detect users viewing my website on a TV?
I want to see in Google Analytics whether or not people are viewing my website on a TV, such as with a smart TV or other device connected to their TV. These are the only ways to do this that I have found so far: Operating system: Google TV, Nintendo Wii, Playstation 3, Xbox Browser: Nintendo Browser, Playstation 3 Are there other data points that I can reliably use to segment these users?
Reporting & Analytics | Nov 26, 2013, 6:52 AM | RCF0 -
Why is Google Analytics showing index.php after every page URL?
Hi, My client's site has GA tracking code gathering correct data on the site, but the pages are listed in GA as having /index.php at the end of every URL, although this does not appear when you visit the site pages. Even if there is a redirect happening for site visitors, shouldn't GA be showing the pages as their redirect destination, i.e. the URL that visitors actually see? Could this discrepancy be adversely affecting my search performance? Example page: http://freshstarttax.com/innocent-spouse/ shows up in GA as http://freshstarttax.com/innocent-spouse/index.php thanks
Reporting & Analytics | Mar 27, 2014, 9:43 AM | JMagary0 -
Google Analytics - Keywords (not set) or ( not provided) WHY???
In Analytics, most of my visitors are landing on my home page, but when trying to see wich keywords they use, most of them are: (not set) or ( not provided) See screencast: http://screencast.com/t/AKwPW76qLVsN Can you tell why? What is going on? Is there a way to solve this? Thank you, BigBlaze
Reporting & Analytics | May 30, 2013, 4:33 AM | BigBlaze2050