Moz Q&A is closed.
After more than 13 years, and tens of thousands of questions, Moz Q&A closed on 12th December 2024. Whilst we’re not completely removing the content - many posts will still be possible to view - we have locked both new posts and new replies. More details here.
PageSpeed Insights DNS Issue
-
Hi
Anyone else having problems with Google's Pagespeed tool? I am trying to benchmark a couple of my sites but, according to Google, my sites are not loading. They will work when I run them through the test at one point but if I try again, say 15 mins later, they will present the following error message
An error has occured
DNS error while resolving DOMAIN. Check the spelling of the host, and ensure that the page is accessible from the public Internet. You may refresh to try again.
If the problem persists, please visit the PageSpeed Insights mailing list for support.
This isn't too much an issue for testing page speed but am concerned that if Google is getting this error on the speed test it will also get the error when trying to crawl and index the pages.
I can confirm the sites are up and running. I the sites are pointed at the server via A-records and haven't been changed for many weeks so cannot be a dns updating issue. Am at a loss to explain.
Any advice would be most welcome. Thanks.
-
Hi
Thanks for looking at the issue. There should be four working nameservers. I have four set in both WHM and at my domain registrar. I added two more two (3 and 4) so maybe they are taking a while to resolve around the web.
Will look at the SOA, thanks. Server and domain set up isn't at the top of my skill set. The domain you mention in this thread is just a testing domain to see what happens with a certain kind of content so it hasn't been treated too seriously to be honest.
-
It looks like you have some NS problems according to IntoDNS. The largest issue is that you have 4 nameservers listed with your registrar but only 2 are listed in your DNS.
~]$ dig NS yoactive.co.uk
;; ANSWER SECTION:
yoactive.co.uk. 86400 IN NS ns2.ccgdigitalmarketing.com.
yoactive.co.uk. 86400 IN NS ns1.ccgdigitalmarketing.com.You should have a NS record for each DNS server. Also, your SOA is set to expire in... 5 weeks?! That's crazy long.
If you can't get this resolved with your host, you can always try CloudFlare, a free DNS + proxy service.
-
thanks, very useful tool. None of my domains passed but i can still access them. Will try moving away from A record set up and use nameservers instead
-
Hi, you can check your dns config here:
http://dnscheck.pingdom.com. If problems with resolving your domain. ask you hostingprovider to set the dns right. otherwise you have to do it yourself in you hosting configuration tool like direct admin or plex.
Grtz, Leonie
Got a burning SEO question?
Subscribe to Moz Pro to gain full access to Q&A, answer questions, and ask your own.
Browse Questions
Explore more categories
-
Moz Tools
Chat with the community about the Moz tools.
-
SEO Tactics
Discuss the SEO process with fellow marketers
-
Community
Discuss industry events, jobs, and news!
-
Digital Marketing
Chat about tactics outside of SEO
-
Research & Trends
Dive into research and trends in the search industry.
-
Support
Connect on product support and feature requests.
Related Questions
-
Escort directory page indexing issues
Re; escortdirectory-uk.com, escortdirectory-usa.com, escortdirectory-oz.com.au,
Technical SEO | | ZuricoDrexia
Hi, We are an escort directory with 10 years history. We have multiple locations within the following countries, UK, USA, AUS. Although many of our locations (towns and cities) index on page one of Google, just as many do not. Can anyone give us a clue as to why this may be?0 -
Any crawl issues with TLS 1.3?
Not a techie here...maybe this is to be expected, but ever since one of my client sites has switched to TLS 1.3, I've had a couple of crawl issues and other hiccups. First, I noticed that I can't use HTTPSTATUS.io any more...it renders an error message for URLs on the site in question. I wrote to their support desk and they said they haven't updated to 1.3 yet. Bummer, because I loved httpstatus.io's functionality, esp. getting bulk reports. Also, my Moz campaign crawls were failing. We are setting up a robots.txt directive to allow rogerbot (and the other bot), and will see if that works. These fails are consistent with the date we switched to 1.3, and some testing confirmed it. Anyone else seeing these types of issues, and can suggest any workarounds, solves, hacks to make my life easier? (including an alternative to httpstatus.io...I have and use screaming frog...not as slick, I'm afraid!) Do you think there was a configuration error with the client's TLS 1.3 upgrade, or maybe they're using a problematic/older version of 1.3?? Thanks -
Technical SEO | | TimDickey0 -
How do I complete a reverse DNS check when completing log file analysis?
I'm doing some log file analysis and need to run a reverse DNS check to ensure that I'm analysing logs from Google and not any imposters. Is there a command I can use in terminal to do this? If not, whats the best way to verify Googlebot? Thanks
Technical SEO | | daniel-brooks0 -
Server Connection Error when using Google Speed Test Insight and GTMetrix
Hi Guys, Recently got into the issue when testing load speed of my website (https://solvid.co.uk). Occasionally, Google Speed Insights gives me a server connection error which states _"PageSpeed was unable to connect to the server. Ensure that you are using the correct protocol (_http vs https), the page loads in a browser, and is accessible on the public internet." Also, GTMetrix gives me an error as well, which states the following: "An error occurred fetching the page: HTTPS error: SSl connect attempt failed" All of my redirects seem to be set-up correctly as well as the SSL certificate. I've contacted my hosting provider (godaddy), they are saying that everything is fine with the server and the installation. Also, tried in different browsers in incognito mode, still gives me the same error. Until yesterday I haven't had such a problem. I've also attached the error screenshot links. I would really appreciate your help! Dmytro UxchPYR M52iPDf
Technical SEO | | solvid1 -
Canonical issues using Screaming Frog and other tools?
In the Directives tab within Screaming Frog, can anyone tell me what the difference between "canonicalised", "canonical", and "no canonical" means? They're found in the filter box. I see the data but am not sure how to interpret them. Which one of these would I check to find canonical issues within a website? Are there any other easy ways to identify canonical issues?
Technical SEO | | Flock.Media0 -
Sitelinks Issue - Different Languages
Hey folks, We run different ccTLD's for revolveclothing.com (revolveclothing.es, revolveclothing.com.br, etc. etc.) and they all have their own WMT/Google Console with their own href lang tags etc. The problem is this. https://www.google.fr/#q=revolve+clothing When you look at the sitelinks, you'll see that one of them (sales page) happens to be in Portuguese on the French site. Can anyone investigate and see why?
Technical SEO | | ggpaul5620 -
<sub>& <sup>tags, any SEO issues?</sup></sub>
Hi - the content on our corporate website is pretty technical, and we include chemical element codes in the text that users would search on (like S02, C02, etc.) A lot of times our engineers request that we list the codes correctly, with a <sub>on the last number. Question - does adding this code into the keyword affect SEO? The code would look like SO<sub>2</sub>.</sub> Thanks.
Technical SEO | | Jenny10 -
Duplicate Title Tag issue due to Shopify CMS
Hi guys, I'm a novice really when it comes to SEO, yet have taken it in house for the next year or so, firstly because I have had my fingers burnt twice...and secondly, to allow me to recoup some of the loss from my prior campaigns. One thing I have noticed on my site (which uses a Shopify E-commerce CMS), is that Shopify duplicates a url for each my products. An example of this is http://www.vidahomes.co.uk/collections/designer-radiators-heating/products/reina-aliano
Technical SEO | | philscott2006
http://www.vidahomes.co.uk/products/reina-aliano Both products provide exactly the same information, yet appear in different ways subject to how the customer finds them. I contacted Shopify to find a fix to this issue when I noticed a high amount of Duplicate Title Tags in my SEO crawl. Their response was as follows. Using a rel canonical link will help prevent duplicate content issues with search engines. All you need to do is add this line of code: **<link rel="canonical" href="{{ canonical_url }}" />** ** before the tag in the theme.liquid file. It’s that simple :)** The theme liquid file basically generates the outer template for the whole site, and is only compromised when over-ruled. This all seems a little too easy for me, so I am hoping whether someone can elaborate as to whether this will work or not, as I'm not entirely sold on their response. I was always under the impression with canonical tags, that they should be added to the header section of the duplicate page in question, which refers back to the original page. The code I have been told to add above implies that the canonical tag would be added to every page in my site so the Google robot would have a hard time in finding anything at all of relevance Thanks in advance for any assistance with this. Kind Regards Phil Scott Vida Homes0