Moz Q&A is closed.
After more than 13 years, and tens of thousands of questions, Moz Q&A closed on 12th December 2024. Whilst we’re not completely removing the content - many posts will still be possible to view - we have locked both new posts and new replies. More details here.
Multiple 301 redirects for a HTTPS URL. Good or bad?
-
I'm working on an ecommerce website that has a few snags and issues with it's coding.
They're using https, and when you access the website through domain.com, theres a 301 redirect to http://www.domain.com and then this, in turn, redirected to https://www.domain.com.
Would this have a deterimental effect or is that considered the best way to do it. Have the website redirect to http and then all http access is redirected to the https URL?
Thanks
-
My personal rule of thumb - as few redirect jumps as possible. Three main reasons:
1. User journey + Browsers - Sometimes when there are too many redirects taking place, some browsers find it difficult to follow through and would simply not load the page. Also, even if there were only 2-3, the browser may load, but users on slower connections may find it tiresome waiting for content to load.
2. As ThompsonPaul highlights, you COULD lose some link value due to dilution through 301 redirects.
3. Multiple 301 redirects are often used by spammers and I foresee in the near future these causing a lot of ranking headaches. The older the site, the longer the chain might end up - for example, imagine you had a product at:
https://domain.com/product1
Links to that page exist at domain.com/product1The journey would be: domain.com/product1 >http://domain.com/product1 > https://domain.com/product1
Now imagine a year down the line, product 1 is discontinued and you decide to redirect https://domain.com/product1 to domain.com/product2
Imagine your journey now:
domain.com/product1 >http://domain.com/product1 > https://domain.com/product1 > domain.com/product2 >http://domain.com/product2 > https://domain.com/product2
This could carry on indefinitely in the lifetime of the site...
Best solution: Decide what version of the site you want to use and simply try and use only one redirect, not a chain. Periodically check for chained redirects and resolve as you go along. (I try and do this bi annually).
-
To answer your specific question, Jason, yes, there's an issue with those URLs going through two consecutive redirects.
Each redirect, like any link, costs a little bit of "link juice". So running through two consecutive redirects is wasting twice as much link juice as if the origin URL redirects immediately to the final URL without the intermediate step. It's not a massive difference, but on an e-commerce site especially, there's no point in wasting any. (Some folks reckon the loss could be as high as 15% per link/redirect.) Plus, I've occasionally seen problems with referrer data being maintained across multiple redirects (anecdotal).
Hope that answers your specific question?
Paul
-
I agree with Jane. Unless there are reasons why the whole site needs to be secure, it makes more sense for just the areas where sensitive information is being submitted to be SSL encrypted.
http: requests are processed more quickly than https: ones due to the SSL handshake required to produce the cryptographic parameters for the user's session - so your site would be a little quicker if you weren't using SSL.
However, if you do decide to use http: rather than https: for the product & category pages like Jane has suggested - you'd need to ensure that the https: versions of these pages redirect to http:... again to avoid duplicate content.
-
Hi Jason,
To add to what Yusuf has said, is there a specific reason why the whole site has to use SSL, rather than just the parts of the website where sensitive information is passed? If so, I would be tempted to recommend that the e-commerce pages (products, categories, etc.) remain on HTTP URLs.
Cheers,
Jane
-
Hi Jason,
It's fine to 301 redirect from http: to https: and it's quite common for sites that use SSL. It's exactly the same principle as redirecting from a non-www to www (e.g. http://example.com to http://www.example.com) - which is considered to be good practice. But there should only be a single redirect. So you should ensure that http://example.com redirects to https://www.example.com without first redirecting to http://www.example.com.
I would also make sure that all pages (not just the homepage) redirect from http: to https: too to ensure there are no duplicate content issues on the rest of the site.
Got a burning SEO question?
Subscribe to Moz Pro to gain full access to Q&A, answer questions, and ask your own.
Browse Questions
Explore more categories
-
Moz Tools
Chat with the community about the Moz tools.
-
SEO Tactics
Discuss the SEO process with fellow marketers
-
Community
Discuss industry events, jobs, and news!
-
Digital Marketing
Chat about tactics outside of SEO
-
Research & Trends
Dive into research and trends in the search industry.
-
Support
Connect on product support and feature requests.
Related Questions
-
Google Is Indexing my 301 Redirects to Other sites
Long story but now i have a few links from my site 301 redirecting to youtube videos or eCommerce stores. They carry a considerable amount of traffic that i benefit from so i can't take them down, and that traffic is people from other websites, so basically i have backlinks from places that i don't own, to my redirect urls (Ex. http://example.com/redirect) My problem is that google is indexing them and doesn't let them go, i have tried blocking that url from robots.txt but google is still indexing it uncrawled, i have also tried allowing google to crawl it and adding noindex from robots.txt, i have tried removing it from GWT but it pops back again after a few days. Any ideas? Thanks!
Intermediate & Advanced SEO | | cuarto7150 -
301 redirect hops from non-https and www
It's best practice to minimize the amount of 301 redirect hops. Ideally only one redirect hop. It's also best practice to 301 redirect (or at least canonical) your non-https and/or your non-www (or www) to the canonical protocol/subdomain. The simplest (and possibly the most common) way to implement canonical protocol/subdomain redirects is through a load balancer or before your app processes the request. Both of which will just blanket 301 to the canonical domain/protocol regardless if the path exists or not In which case, you could have: Two hops. i.e. hop #1 http://example.com/foo to https://example.com/foo, hop #2 https://example.com/foo to https://example.com/bar 301 to a 404. Let's say https://example.com/dog never existed, but somebody for whatever reason linked to it (maybe a typo). If I request https://www.example.com/dog, the load balancer would 301 to a 404 page. Either scenario above should be fairly rare. However, you can't control how people link to you. Should I care about either above scenario? I could have my app attempt to check if the page exists before forwarding, but that code could be complicated.
Intermediate & Advanced SEO | | dsbud0 -
Hacked website - Dealing with 301 redirects and a large .htaccess file
One of my client's websites was recently hacked and I've been dealing with the after effects of it. The website is now clean of malware and I already appealed to Google about the malware issue. The current issue I have is dealing with the 20, 000+ crawl errors which are garbage links that were created from the hacking. How does one go about dealing with all the 301 redirects I need to create for all the 404 crawl errors? I'm already noticing an increased load time on the website due to having a rather large .htaccess file with a couple thousand 301 redirects done already which I fear will result in my client's website performance and SEO performance taking a hit as well.
Intermediate & Advanced SEO | | FPK0 -
Site-wide Canonical Rewrite Rule for Multiple Currency URL Parameters?
Hi Guys, I am currently working with an eCommerce site which has site-wide duplicate content caused by currency URL parameter variations. Example: https://www.marcb.com/ https://www.marcb.com/?setCurrencyId=3 https://www.marcb.com/?setCurrencyId=2 https://www.marcb.com/?setCurrencyId=1 My initial thought is to create a bunch of canonical tags which will pass on link equity to the core URL version. However I was wondering if there was a rule which could be implemented within the .htaccess file that will make the canonical site-wide without being so labour intensive. I also noticed that these URLs are being indexed in Google, so would it be worth setting a site-wide noindex to these variations also? Thanks
Intermediate & Advanced SEO | | NickG-1230 -
301 redirects Ruby on Rails
Can anyone point me to the best way to implement 301 redirects on a Ruby on Rails website?
Intermediate & Advanced SEO | | brianvest0 -
How to set up 301 redirect for URL with question mark
I have encountered some issue with 301 redirect and htaccess file. I need to redirect the following url: http://www.domain.com/?specifications=colours/page/3 to: http://www.domain.com/colours The 301 redirect command I wrote in htaccess file is as follow: Redirect 301 /?specifications=colours/page/3 http://www.domain.com/colours And it doesn't work at the moment. What is the correct way to set up 301 redirect here? Your help will be sincerely appreciated!
Intermediate & Advanced SEO | | robotseo0 -
DNS or 301 Website Redirect
We are running a marketplace site, so we have thousands of vendors selling their products on our site. Each vendor has a Profile page and we are soon to launch a premium store-front that is white label. Many of these vendors will want to point a custom url to their premium store-front (which is a sub domain of the marketplace) and we are trying to get an understanding of how we should instruct them to point their url in a way that will give the main marketplace site the seo juice. We also want to understand what will show up in the address bar. Will it be their url or our sub domain? Will any of the marketplace seo juice boost their url local listing status?
Intermediate & Advanced SEO | | bloomnation0 -
Meta Tag Force Page Refresh - Good or Bad?
I had recently come across a meta tag that could cause a auto refresh on a users browser when implemented. I have been using it for a redesign and was curious if there could be any negative effects for using it, here is the code: All input is appreciated. Ciao, Todd Richard
Intermediate & Advanced SEO | | RichFinnSEO0