Moz Q&A is closed.
After more than 13 years, and tens of thousands of questions, Moz Q&A closed on 12th December 2024. Whilst we’re not completely removing the content - many posts will still be possible to view - we have locked both new posts and new replies. More details here.
Does Google give weight to the default measurement units (metric / imperial) on pages?
-
Hi,
We run a series of weather websites that cater for the units (feet, metres, Celsius, Fahrenheight etc.) for the users by means of detecting their geo-location. So users in the US see the site in feet, Fahrenheight and pretty much the rest of the world gets metric units.
My concern is that if we view the cached version of our pages as seen by the Googlebot out of Mountain View, California, it shows that our geoIP switch to imperial units has been activated for every location in the World.
The question is, does the fact that we appear to cater for countries who use metric units by showing (in Google's eyes) Imperial units by default count against us from an SEO point of view?
Thanks in advance for any comments,
Nick
-
It sounds like you might be using an automatic redirect based on IP. Is that true? If so, that's why Google is only showing the US numbers. They don't prefer one over the other, but you are inherently only showing them the US numbers if you are doing that redirect.
My suggestion is to let people set their location with a javascript based popup that sets a cookie. That will then modify the numbers. If you prefer Google sees the metric numbers, show that to any user that doesn't have a cookie set.
-
Great pun in your question!
-
Nick
If using symbols I would have think not. My experience is google discounts common symbols. However if it is written yes, I believe it would have an impact. That is something google would take into account.
In fairness I would think people would type in "weather Melbourne tomorrow" or "weather this weekend" - So I would think the most relevant aspect for SEO is dealing with those keywords... and serving up content that answers those queries.
-
I really can't imagine it would Nick. Have you noticed any reduction in the SERPs that are making you concerned? Google, obviously, have no guidelines on this, so perhaps add in a way to change the units manually, if you wish?
-Andy
Got a burning SEO question?
Subscribe to Moz Pro to gain full access to Q&A, answer questions, and ask your own.
Browse Questions
Explore more categories
-
Moz Tools
Chat with the community about the Moz tools.
-
SEO Tactics
Discuss the SEO process with fellow marketers
-
Community
Discuss industry events, jobs, and news!
-
Digital Marketing
Chat about tactics outside of SEO
-
Research & Trends
Dive into research and trends in the search industry.
-
Support
Connect on product support and feature requests.
Related Questions
-
Website ranking stuck on 2nd page of google. How to bring it in top 10 position??
Hi I am working on a site indianhomeappliances.in that for search terms such as 'best washing machine in india' appears near the top of the 2nd page of Googl for url https://indianhomeappliances.in/best-washing-machine-in-india/ When looking at what is listed on the 1st page for 'best washing machine in india' I would appreciate any advice/guidance on what else could be done to give the site a final push to get on the 1st page of search results. I have made more than 60 backlinks along with sites from competitor analysis via moz for this page Looking at the sites that are on the 1st page I cant understand why many of them are ranking higher than me? Any insight and plan of attack would be most appreciated from any search experts on the forum. My website is 2.5 months old. Many Thanks
Intermediate & Advanced SEO | | Pank00770 -
Looking for opinions on structuring meta title tags/page title/menu title/H1
Hi everyone I am hoping a few of you can share your opinions. I have been having conversations (okay, healthy debates) about how to write/structure meta title tag and how to compliment them with the H1, page title, menu name. To help explain the thought processes I will use a pretend keyword. How about "screwdriver". Case: (I made this up) we are redesigning a website for a construction tools manufacturing company (pretend name: ABC Tools) targeting OEMs who are interested in purchasing large quantities of tools. The product categories (to become main menu items) are Screwdrivers, Nails, Drills, and Hammers. (bear with me .... this is just an example I am making up on the fly) K. Circling back to screwdrivers - let's say we have one landing page (a primary category page and in the main menu) listing products and great details about screwdrivers. Focus keywords are screwdriver manufacturer, screwdriver supplier, construction screwdrivers Below are questions being debated. If you are willing ... how would you address these questions? And, can you explain WHY? QUESTION ONE: How would you structure the meta title tag (feel free to write one of your own) Screwdriver Manufacturer - Construction Screwdriver | ABC Tools ABC Tools - US-based Screwdriver Manufacturer Supplier Near You High-Quality Screwdrivers for Construction with ABC Tools QUESTION TWO: how would you write the H1 on the page? Would it match the meta tag? OR, would you write something different using the primary keyword? QUESTION THREE Remembering this is not a blog post ... it is a primary landing page linked to the main navigation. What would the menu title be? (remember the product categories above are how the main menu items are bucketed) Screwdrivers Screwdriver Manufacturer Typically in WordPress, the H1 and the menu title is auto-populated using the page title (not the title tag)... So, if we use Screwdrivers as the page title but we want the H1 to match the meta title tag, would we manually change the H1? Or, have the page title and title tag match, but manually change the menu item?
Intermediate & Advanced SEO | | Brenda.Haines1 -
Will Reduced Bounce Rate, Increased Pages/Session, Increased Session Duration-RESULT IN BETTER RANKING?
Our relaunched website has a much lower bounce rate (66% before, now 58%) increased pages per session (1.89 before, now 3.47) and increased session duration (1:33 before, now 3:47). The relaunch was December 20th. Should these improvements result in an improvement in Google rank? How about in MOZ authority? We have not significantly changed the content of the site but the UX has been greatly improved. Thanks, Alan
Intermediate & Advanced SEO | | Kingalan11 -
My product category pages are not being indexed on google can someone help?
My website has been indexed on google and all of its pages can be found on google except for the product category pages - which are where we want our traffic heading to, so this is a big problem for us. Our website is www.skirtinguk.com And an example of a page that isn't being indexed is https://www.skirtinguk.com/product-category/mdf-skirting-board/
Intermediate & Advanced SEO | | chelseaskirtinguk0 -
Is Google able to see child pages in our AJAX pagination?
We upgraded our site to a new platform the first week of August. The product listing pages have a canonical issue. Page 2 of the paginated series has a canonical pointing to page 1 of the series. Google lists this as a "mistake" and we're planning on implementing best practice (https://webmasters.googleblog.com/2013/04/5-common-mistakes-with-relcanonical.html) We want to implement rel=next,prev. The URLs are constructed using a hashtag and a string of query parameters. You'll notice that these parameters are ¶meter:value vs ¶meter=value. /products#facet:&productBeginIndex:0&orderBy:&pageView:grid&minPrice:&maxPrice:&pageSize:& None of the URLs are included in any indexed URLs because the canonical is the page URL without the AJAX parameters. So these results are expected. Screamingfrog only finds the product links on page 1 and doesn't move to page 2. The link to page 2 is AJAX. ScreamingFrog only crawls AJAX if its in Google's deprecated recommendations as far as I know. The "facet" parameter is noted in search console, but the example URLs are for an unrelated URL that uses the "?facet=" format. None of the other parameters have been added by Google to the console. Other unrelated parameters from the new site are in the console. When using the fetch as Google tool, Google ignores everything after the "#" and shows only the main URL. I tested to see if it was just pulling the canonical of the page for the test, but that was not the case. None of the "#facet" strings appear in the Moz crawl I don't think Google is reading the "productBeginIndex" to specify the start of a page 2 and so on. One thought is to add the parameter in search console, remove the canonical, and test one category to see how Google treats the pages. Making the URLs SEO friendly (/page2.../page3) is a heavy lift. Any ideas how to diagnose/solve this issue?
Intermediate & Advanced SEO | | Jason.Capshaw0 -
Dynamic pages - ecommerce product pages
Hi guys, Before I dive into my question, let me give you some background.. I manage an ecommerce site and we're got thousands of product pages. The pages contain dynamic blocks and information in these blocks are fed by another system. So in a nutshell, our product team enters the data in a software and boom, the information is generated in these page blocks. But that's not all, these pages then redirect to a duplicate version with a custom URL. This is cached and this is what the end user sees. This was done to speed up load, rather than the system generate a dynamic page on the fly, the cache page is loaded and the user sees it super fast. Another benefit happened as well, after going live with the cached pages, they started getting indexed and ranking in Google. The problem is that, the redirect to the duplicate cached page isn't a permanent one, it's a meta refresh, a 302 that happens in a second. So yeah, I've got 302s kicking about. The development team can set up 301 but then there won't be any caching, pages will just load dynamically. Google records pages that are cached but does it cache a dynamic page though? Without a cached page, I'm wondering if I would drop in traffic. The view source might just show a list of dynamic blocks, no content! How would you tackle this? I've already setup canonical tags on the cached pages but removing cache.. Thanks
Intermediate & Advanced SEO | | Bio-RadAbs0 -
Duplicate page titles Wordpress SEO/Yoast
Hi I have a Wordpress site using the Wordpress SEO plugin by Yoast. Everything appears to be fine except that on 1 Feb SEOMoz crawl suddenly picked up a bunch of errors. The errors are duplicate page titles, and these exist only for the mysite.com/page/X pages. I can't find any setting in Yoast that looks wrong or tells me how to fix this. The pages are also dynamically canonicalizing to themselves - not sure if this makes any difference although I don't know how this is happening. Does anyone know how to fix this duplicate title error? Alex
Intermediate & Advanced SEO | | alextanner0 -
Disallowed Pages Still Showing Up in Google Index. What do we do?
We recently disallowed a wide variety of pages for www.udemy.com which we do not want google indexing (e.g., /tags or /lectures). Basically we don't want to spread our link juice around to all these pages that are never going to rank. We want to keep it focused on our core pages which are for our courses. We've added them as disallows in robots.txt, but after 2-3 weeks google is still showing them in it's index. When we lookup "site: udemy.com", for example, Google currently shows ~650,000 pages indexed... when really it should only be showing ~5,000 pages indexed. As another example, if you search for "site:udemy.com/tag", google shows 129,000 results. We've definitely added "/tag" into our robots.txt properly, so this should not be happening... Google showed be showing 0 results. Any ideas re: how we get Google to pay attention and re-index our site properly?
Intermediate & Advanced SEO | | udemy0