Moz Q&A is closed.
After more than 13 years, and tens of thousands of questions, Moz Q&A closed on 12th December 2024. Whilst we’re not completely removing the content - many posts will still be possible to view - we have locked both new posts and new replies. More details here.
Redirecting deleted posts 301 vs 302
-
There is a category on WP where job ads are posted. when a post got deleted I would like to pass 404 error page and redirect all those deleted posts to specific category.
I found WP plugin Auto Redirect 404 in 301 for Trashed Posts which does redirect deleted post to specific URL. But posts which are in the trash (not permanently deleted) will get 302 redirects. Those deleted permanently will get 301 redirects.
Should I try editing this plugin or find another why? Maybe there is similar way with Redirection plugin?
-
It's probably easier to only use 301 redirects, especially if the majority of deleted posts are not going to be restored and are deleted permanently in a few months.
-
Actually those posts get permanently deleted after a while (1-5 months). But as I said before, some of them get deleted and then they need to be reposted again before they will get permanently deleted.
-
Then a 302 would be more appropriate as it is a temporary redirect. It sounds like you need to work on some of your publishing operations/procedures. Ideally, once you publish a post, it stays up etc. You need to figure out how you can improve the process so that you minimize getting into the situation to start with.
If you need to, I would delay the posting to start with if that would ensure that once it posts, it stays up on the site etc.
Good luck.
-
I don't own that site but the owner of the site needs post to be kept in the trash because those posts often have to be restored.
-
You need the 301 redirects. 302 redirects give me ulcers. Is there any reason you are keeping things in the trash? If you really need to save something for later, putting it in the trash is probably not your best option. If you need to permanently delete them - then go ahead. If you need the trash option for storage, then you probably need another plugin.
Got a burning SEO question?
Subscribe to Moz Pro to gain full access to Q&A, answer questions, and ask your own.
Browse Questions
Explore more categories
-
Moz Tools
Chat with the community about the Moz tools.
-
SEO Tactics
Discuss the SEO process with fellow marketers
-
Community
Discuss industry events, jobs, and news!
-
Digital Marketing
Chat about tactics outside of SEO
-
Research & Trends
Dive into research and trends in the search industry.
-
Support
Connect on product support and feature requests.
Related Questions
-
My site auto redirects http to https. This is causing redirect chains. What can I do?
I noticed that Moz flags a lot of redirect chain issues on my site. I realized that this is mostly because the site automatically redirects http to https, and when I create a new URL (when a URL changes, for example) it is automatically flagged as a chain. Example: http://www.example-link Auto directs to: https://www.example-link Which is then redirected to: https://www.example-link-changed (when the address actually changes) I don't seem to have any control over changing where the initial http redirect goes. Any advice on fixing this problem?
On-Page Optimization | Dec 28, 2019, 7:05 AM | baystatemarketing0 -
Getting the Titles and Headings Right on Product Pages. Userbility vs SEO
Hey Mozzers, I am optimising a chaotic section of the site including many similar products. Writing unique content etc. The titles and urls were all over the place so my first job was to tidy them up so I could make some sense of the situation, especially as sometimes they didn't even match! I should point out were on Magento, so product name = Both the Heading and Title of the page, the meta title can be set separately. When i refer to title I mean both <title>and <h1></strong><br /><br />Before they existed as such<br />URL: domain.com/200-x-0-5-g-rs-232-balance.html<br />TItle: PC-1234 200 x 0.5g x 0.3 RS-232 Balance<br /><br />This format was (Product Code, Capacities, Resolutions, Accuracy, Product Title)<br /><br />The issue was all 60 products in a page followed this format. Navigating through the page was a nightmare and was just a jumble of numbers and highly confusing even to me who learnt what they all mean, especially when you had 8 products from the same range you got presented with<br /><br />APC-1234 200 x 0.5g x 0.3 RS-232 Balance<br />APC-1235 500 x 1g x 0.3 RS-232 Balance<br />APC-1236 1000 x 2g x 0.3 RS-232 Balance<br />APC-1238 5000 x 10g x 0.3 RS-232 Balance<br />APC-1239 10000 x 15g x 0.3 RS-232 Balance<br />APC-1210 20000 x 25g x 0.3 RS-232 Balance<br />APC-1211 50000 x 50g x 0.3 RS-232 Balance</p> <p>I changed them to something more user friendly.<br /><br />URL: domain.com/200g-precision-balance.html<br />Title: 200g Precision Balance<br /><br />This has seen the following benefits<br />- URL is now clear and means something to the user<br />- Product titles are easy to navigate and the page is more pleasing to the eye<br />- The jumble of numbers in the title are now all labelled and shown below each product listing in bullet point so the user can see the basic spec of a product without having to decipher any titles<br /><br />Upon reflection I has a couple of concerns I was hoping you could discuss, I am wondering if I have made the titles too simple.<br />1) I have no product code in the title<br />We have our own products manufactured and sell existing brands with their own product codes. Some of these can be lengthy. Adding them makes them hard to the eye and the page looked cramped.<br /><br />The codes are listed beneath each product title on category pages and on a list on the actual product page, but no where in the titles. <br /><br />2)None of our products have a brand listed in the title<br />None of the products on the site had brand names in anything but the images when i started and as such it snuck under my radar. But should i pre-fix all titles with a brand name?<br /><br />Should </p> <p>URL: domain.com/200g-precision-balance.html<br />Title: 200g Precision Balance</p> <p>become</p> <p>URL: domain.com/BRAND1-200g-precision-balance.html<br />Title: BRAND1 200g Precision Balance<br /><br />My instinct tells me to change things to include brands as its useful to the customer and should have an SEO benefit, but to leave out product codes as they are accessible to the customer where they are now and dont make things messy and unreadable.<br /><br />As always, thanks for the input!</p></title>
On-Page Optimization | Feb 19, 2016, 6:32 AM | ATP0 -
After HTTPS upgrade, should I change all internal links, or a general 301 redirect is better?
I recently upgraded to https. Of course most internal links of my old posts are still http. So I set up a 301 redirect in order to make the old link works. In terms od SEO this is good or it is better to update all the internal links to https, manually? In that case can I do it in batch with a search/replace command in the phmyadmin database? any other suggested method? thank you
On-Page Optimization | Dec 7, 2015, 12:11 PM | micvitale0 -
Using keywords in my URL: Doing a redirect to /keyword
My website in "On Page Grade" received an A.Anyway, I only have 1 thing to optimize:_"Use Keywords in your URL__Using your targeted keywords in the URL string adds relevancy to your page for search engine rankings, assists potential visitors identify the topic of your page from the URL, and provides SEO value when used as the anchor text of referring links."_My website is ranking in top10 for a super high competitive keyword and all my others competitors have the keyword on their domain, but not for my URL.Since I can't change my domain for fixing this suggestion, I would like to know what do you think about doing a 301 redirect from / to mydomainname.com/keyword/So the index of my website would be the /keyword.I don't know if this can make a damage to my SERP for the big change ir it would be a great choice.
On-Page Optimization | Mar 30, 2015, 10:13 AM | estebanseo0 -
Recommended number of blog posts per page?
Good day! We want to have your suggestions here.
On-Page Optimization | Jan 29, 2013, 4:49 PM | robinwade
What's your recommended (best) number of blog posts per page? Thanks!0 -
My Domain Name - short vs relevant
I'm creating a website for my new web design company in Vancouver. I'm looking to target such keywords as "Web Design Vancouver", etc. I have another company with a hyphenated domain name which is terrible when I'm on the phone and my client asks me for my domain (hard to say, always spelling it out). Also I wanted to have a good snappy name for my new business so I found a 6 letter .com and matching .ca for my company. My question is: is it best to use a short domain name or is it better have my keywords in the domain name? eg. xyz.com vs xyzvancouverwebdesign.com Thanks
On-Page Optimization | Apr 26, 2011, 4:36 PM | VebianWebandMobileDevelopment0 -
Would it be bad to change the canonical URL to the most recent page that has duplicate content, or should we just 301 redirect to the new page?
Is it bad to change the canonical URL in the tag, meaning does it lose it's stats? If we add a new page that may have duplicate content, but we want that page to be indexed over the older pages, should we just change the canonical page or redirect from the original canonical page? Thanks so much! -Amy
On-Page Optimization | Mar 8, 2011, 9:32 PM | MeghanPrudencio0 -
Post Title - Use the blog's name or not?
In the tile of my post, shoudl I used my blog's name in it at the end or emit the blog name. EX: title of post with keywords | name of blog OR EX: title of post with keywords The site's name is 3 words long, so I'm worrying that those extra words are diluting the keywords in the post's name that I'm trying to target.
On-Page Optimization | Mar 3, 2011, 11:55 PM | gregalam0