Moz Q&A is closed.
After more than 13 years, and tens of thousands of questions, Moz Q&A closed on 12th December 2024. Whilst we’re not completely removing the content - many posts will still be possible to view - we have locked both new posts and new replies. More details here.
Redirecting deleted posts 301 vs 302
-
There is a category on WP where job ads are posted. when a post got deleted I would like to pass 404 error page and redirect all those deleted posts to specific category.
I found WP plugin Auto Redirect 404 in 301 for Trashed Posts which does redirect deleted post to specific URL. But posts which are in the trash (not permanently deleted) will get 302 redirects. Those deleted permanently will get 301 redirects.
Should I try editing this plugin or find another why? Maybe there is similar way with Redirection plugin?
-
It's probably easier to only use 301 redirects, especially if the majority of deleted posts are not going to be restored and are deleted permanently in a few months.
-
Actually those posts get permanently deleted after a while (1-5 months). But as I said before, some of them get deleted and then they need to be reposted again before they will get permanently deleted.
-
Then a 302 would be more appropriate as it is a temporary redirect. It sounds like you need to work on some of your publishing operations/procedures. Ideally, once you publish a post, it stays up etc. You need to figure out how you can improve the process so that you minimize getting into the situation to start with.
If you need to, I would delay the posting to start with if that would ensure that once it posts, it stays up on the site etc.
Good luck.
-
I don't own that site but the owner of the site needs post to be kept in the trash because those posts often have to be restored.
-
You need the 301 redirects. 302 redirects give me ulcers. Is there any reason you are keeping things in the trash? If you really need to save something for later, putting it in the trash is probably not your best option. If you need to permanently delete them - then go ahead. If you need the trash option for storage, then you probably need another plugin.
Got a burning SEO question?
Subscribe to Moz Pro to gain full access to Q&A, answer questions, and ask your own.
Browse Questions
Explore more categories
-
Moz Tools
Chat with the community about the Moz tools.
-
SEO Tactics
Discuss the SEO process with fellow marketers
-
Community
Discuss industry events, jobs, and news!
-
Digital Marketing
Chat about tactics outside of SEO
-
Research & Trends
Dive into research and trends in the search industry.
-
Support
Connect on product support and feature requests.
Related Questions
-
Hreflang Errors 404 vs "Page Not Found"
For a websites that differ between catalogs (PDPs) what hreflang error causes the least harm? Obviously the best solution is to only have hreflang for shared products, but this takes more work to implement. So when no identical product exists... 1. Hreflang points to 404 or 410 error. 2. Hreflang points to 200 status "Page Not Found" page. This obviously has the additional issue of needing to point back to 100+ urls. I want to avoid having Google decide to ignore all hreflang due to errors as many correct urls will exist. Any thoughts?
On-Page Optimization | | rigelcable0 -
My site auto redirects http to https. This is causing redirect chains. What can I do?
I noticed that Moz flags a lot of redirect chain issues on my site. I realized that this is mostly because the site automatically redirects http to https, and when I create a new URL (when a URL changes, for example) it is automatically flagged as a chain. Example: http://www.example-link Auto directs to: https://www.example-link Which is then redirected to: https://www.example-link-changed (when the address actually changes) I don't seem to have any control over changing where the initial http redirect goes. Any advice on fixing this problem?
On-Page Optimization | | baystatemarketing0 -
301 Redirects - Large .htaccess file question
We are moving about 5000 pages from root into different folders. We need to individually 301 each page because the are sitting at root level now: mysite.com/page.com We want to move them to: mysite.com/folder/page.html etc I dont think redirect match can works because of the different files names and folders they are being moved in to. Will 5000 entries in .htacess slow site loading? Any other suggestions how to handle?
On-Page Optimization | | leadforms0 -
301 Redirect or landing page
Hi everyone. I'm currently doing some SEO for a client, at the moment he has some landing pages which are categorised, but the category is set as a 302 redirect. I have a dilemma whether to 301 redirect to the landing page or make a page for each category. The link structure is as follows - http://examplesite.co.uk/products/fire/company-1/product/ so currently this is set as a 302 redirect - http://examplesite.co.uk/products/fire/company-1/ Do I make this page a category page and link the page to the children with some on-page optimisation or 301 redirect it?
On-Page Optimization | | Unbranded_Lee0 -
Naked domain redirection info
Hi Guys Been reading one or two posts about 'naked domains' v the 'www' derivative and was wondering... What is your opinion on this, is there a definitive benefit to your business in making the switch in terms of ranking? Apart from the Google released info, do you have any further recommended reading on this subject matter? Thanks in advance Daren
On-Page Optimization | | ITsoldSEO0 -
Getting the Titles and Headings Right on Product Pages. Userbility vs SEO
Hey Mozzers, I am optimising a chaotic section of the site including many similar products. Writing unique content etc. The titles and urls were all over the place so my first job was to tidy them up so I could make some sense of the situation, especially as sometimes they didn't even match! I should point out were on Magento, so product name = Both the Heading and Title of the page, the meta title can be set separately. When i refer to title I mean both <title>and <h1></strong><br /><br />Before they existed as such<br />URL: domain.com/200-x-0-5-g-rs-232-balance.html<br />TItle: PC-1234 200 x 0.5g x 0.3 RS-232 Balance<br /><br />This format was (Product Code, Capacities, Resolutions, Accuracy, Product Title)<br /><br />The issue was all 60 products in a page followed this format. Navigating through the page was a nightmare and was just a jumble of numbers and highly confusing even to me who learnt what they all mean, especially when you had 8 products from the same range you got presented with<br /><br />APC-1234 200 x 0.5g x 0.3 RS-232 Balance<br />APC-1235 500 x 1g x 0.3 RS-232 Balance<br />APC-1236 1000 x 2g x 0.3 RS-232 Balance<br />APC-1238 5000 x 10g x 0.3 RS-232 Balance<br />APC-1239 10000 x 15g x 0.3 RS-232 Balance<br />APC-1210 20000 x 25g x 0.3 RS-232 Balance<br />APC-1211 50000 x 50g x 0.3 RS-232 Balance</p> <p>I changed them to something more user friendly.<br /><br />URL: domain.com/200g-precision-balance.html<br />Title: 200g Precision Balance<br /><br />This has seen the following benefits<br />- URL is now clear and means something to the user<br />- Product titles are easy to navigate and the page is more pleasing to the eye<br />- The jumble of numbers in the title are now all labelled and shown below each product listing in bullet point so the user can see the basic spec of a product without having to decipher any titles<br /><br />Upon reflection I has a couple of concerns I was hoping you could discuss, I am wondering if I have made the titles too simple.<br />1) I have no product code in the title<br />We have our own products manufactured and sell existing brands with their own product codes. Some of these can be lengthy. Adding them makes them hard to the eye and the page looked cramped.<br /><br />The codes are listed beneath each product title on category pages and on a list on the actual product page, but no where in the titles. <br /><br />2)None of our products have a brand listed in the title<br />None of the products on the site had brand names in anything but the images when i started and as such it snuck under my radar. But should i pre-fix all titles with a brand name?<br /><br />Should </p> <p>URL: domain.com/200g-precision-balance.html<br />Title: 200g Precision Balance</p> <p>become</p> <p>URL: domain.com/BRAND1-200g-precision-balance.html<br />Title: BRAND1 200g Precision Balance<br /><br />My instinct tells me to change things to include brands as its useful to the customer and should have an SEO benefit, but to leave out product codes as they are accessible to the customer where they are now and dont make things messy and unreadable.<br /><br />As always, thanks for the input!</p></title>
On-Page Optimization | | ATP0 -
Should I redirect mobile traffic to a different url? Will it hurt SEO?
I'm working on a site that has lots of great content and ranks well but essentially the money is generated by affiliate links. I don't have a mobile version of the site but the company I'm affiliated with does offer a mobile redirect to their domain. Will redirecting mobile traffic to a different url hurt my SEO? I think the user will get a better experience by landing on a mobile page but I don't know if google will see it like that. Any thoughts?
On-Page Optimization | | SamCUK0 -
Post url not matching with post title ( wordpress)
I have this site called searchoflife.com on which I have noticed the post urls are not matching with the post title. For Example:Post Title - A Dialogue With NaturePost URL - http://searchoflife.com/dialogue-nature-2013-09-12 Words like 'A' and 'with' are not present in the post URL. This has been the trend since a few days. After investigating I found out that it was due to my plugin SEO ultimate which is actually creating post slugs automatically for the post urls. So my question is whether it is advisable to use post slugs instead of the full post url. Does it affect the SERPS for my site?
On-Page Optimization | | toxicpls0