Moz Q&A is closed.
After more than 13 years, and tens of thousands of questions, Moz Q&A closed on 12th December 2024. Whilst we’re not completely removing the content - many posts will still be possible to view - we have locked both new posts and new replies. More details here.
Permanent URLs for Twitter?
-
Hi everyone -
The site I am working on is going to start giving users the option to tweet that they completed an action. It reads, for example, "I just took the first step to ( ) with (site): (shortened link) via (Twitter name)"
Here's my question:
Should I worry about the fact that the shortened URL (we're possibly going to use Twitter's shortener T.Co, but I'm not dedicated to it) changes each time? Should we instead have a permanent short URL for the homepage (where we are going to direct people who click the link in the tweet)?
Thanks!
-
Rand talks about URL shorteners and their effect on link juice etc here: http://www.seomoz.org/q/is-there-anyway-for-redirected-links-to-still-provide-seo-value - Very good info (as you would expect from the bearded one...)
-
Roger, I do not think it is necessary, but from a branding perspective, to stand out from the crowd of normal bit.ly users (I'm one of them, btw), it could be a good idea. It may be for my site.
I'd say it depends on the site and the niche.
-
Is your own shortner really necessary? I can't imagine it is.
-
bit.ly pro would work. Personally I use yourls.org
-
Thanks. This is great info.
-
The actual URL takes up too much space. Also, you rarely see people using full URLs in tweets. From a "we know what we're doing here" perspective, the full URL might not be a great idea. Do you disagree?
Matt Cutts said (in the video linked to above) that any decent shortener will 301 redirect the shortened URL and thus pass link juice. I guess I am more concerned about it from a branding/tracking perspective now.
-
This sounds like a good idea. What service do you recommend for creating a custom short URL? Would bit.ly PRO work fine for this?
-
Exactly. It's why I created the http://seoaud.it shortener for my own needs.
-
Can use use the actual URL? That would get you a direct link.
Or, your idea of a permanent short URL that is 301 redirected on your main site would be a good alternative.
Links from tweets are sometimes used elsewhere and getting that linkjuice would be nice.
Also, if you use the actual URL or have complete control over the shortened URL you don't have to worry about it being changed on you.
-
-
I would not be worried about the different URLs. Almost all url shorteners 301 to the destination URL and pass link juice. Even though the shortened URLs are different, they would all be passing the juice to the same spot.
-
It's ultimately irrelevant from an SEO perspective - so it comes down to click tracking. If you have different actions, you'd want a unique shortened URL for each action.
I'd also suggest considering setting up your own URL shortener, rather than relying on 3rd party. As great as Bit.ly is, and as much as Twitter offers their own, the only way to ensure a short URL that's generated is always going to be around is to have your own.
Got a burning SEO question?
Subscribe to Moz Pro to gain full access to Q&A, answer questions, and ask your own.
Browse Questions
Explore more categories
-
Moz Tools
Chat with the community about the Moz tools.
-
SEO Tactics
Discuss the SEO process with fellow marketers
-
Community
Discuss industry events, jobs, and news!
-
Digital Marketing
Chat about tactics outside of SEO
-
Research & Trends
Dive into research and trends in the search industry.
-
Support
Connect on product support and feature requests.
Related Questions
-
Twitter Analytics: Follower Count & Reporting Inconsistencies
Our number of followers on Twitter has suddenly dropped (yet not dropped) in a really weird way. Twitter Analytics shows follower counts in two places: Monthly increases in followers, and then also in the Audience Insights tab, where you can see three months of follower counts mapped in a chart. Month-to-month, the total number of followers continues to rise. What’s inconsistent, however, is the total number of aggregate followers shown in the cart. Twitter just dropped our to total count of followers by about 600. But it’s not like we just suddenly lost 600 followers last month (in fact we gained far more than that), but rather that Twitter seems to have adjusted the aggregate numbers across the board retroactively for all months. So while month-to-month continues to show gains, overall, we still went down. The only way we would have even noticed this, by the way, is because we have a record of the OLD total follower count that Twitter had previously displayed as recently as last month. So confusing. We’re trying to figure out what happened, and the only thing that seems to make sense is that Twitter may have done a huge spam account purge, and instead of making it look like we suddenly lost a lot of followers, they just updated the aggregate total # of followers across all time……? [For the record, we do not buy followers, but we don’t always do the best job at blocking spam followers when the do follow us either.] Any advice would be appreciated, thanks. 🙂
Social Media | | mirabile0 -
Facebook adds a trailing slash to urls?
Hey Guys, we are facing a problem in our www.batuta.com with Facebook shares. Seems like because we choose to set our preferred canonical version urls to end with a trailing slash ( / ), like this one e.g.: www.batuta.com/الوجهات/إسبانيا/ Facebook adds automatically another ( / ) when trying to read the url on first share before its ever indexed in FB. Which makes Facebook think its a bad request! cause then the URL has two // at the end of it. hope this was clear. anyway, so first question: did anybody face this issue before? any solutions? Second, and might be more important: I might be forced to face the option of changing the canonical tags to be a url without a ( / ) if I will have to do this I will enforce a redirect on every url request with an ending trailing slash ( / ) to be redirected to the new canonical version without. will this be enough? how big am I supposed to suffer here? am I facing a long time with double indexed urls? wonder if anybody faced this problem before! Best Regards
Social Media | | Muhammad_Jabali0 -
How to shorten URL adress?
hi,
Social Media | | JonsonSwartz
in my business Facebook page I have my website address. I want to track how many people arriving through this URL address to my site. I want to use URL builder but the final URL is too long and not pretty. I thought about using bitly.com but I need that the address on my page will contain the name of my brand. any ideas hot to shorten the URL address and still be able to track the data? thank you all.0 -
Facebook doesn't "read" pages: 206 responsecode: Could not retrieve data from URL
Hello, Since shortly, every page of our website ecoheating.be doesn't get "read" by Google. So when you paste a page in Facebook, he doesn't get the title, description, image... FB Debugger says there's a 206 Error code (check attachment). A lot of changes are done the last weeks on this site so perhaps something is misconfigured. But what could this be? I've already check the htaccess and nothing there... Thanks, 0cphxGt
Social Media | | conversal0 -
Changing FaceBook Username / url - do you retain your likes/fans
hi just a quickie, anyone know off hand when you change your FB username/url do you retain or lose the likes/fans ? cheers dan
Social Media | | Dan-Lawrence0 -
How can I track on my facebook page shared links without using short url redirect service?
Hi, I wondering how can I track and analyze on all my shared links in my facebook business page without using short url redirect service like: “Tiny” url or “bitly”? Thanks in advance.
Social Media | | JonsonSwartz0 -
My Twitter Username was CHANGED by Twitter!
My twitter user name australia was changed by twitter to Australia1_ My original user name has been given to Toursim Australia. I never saw any correspondence about this from Twitter (I may have deleted it), nor from Tourism Australia. I have managed to send 2 related support requests to twitter; Once explaining I couldn't log in - and their reply was; "The email address you're writing from does not match the email on this account. For privacy reasons, we can't offer any more information about the email." Second time that my account was suspended - they replied; "If you're writing in about Australia1_ being suspended, this account is not currently suspended" I don't believe this can be a trademark issue because you cannot trademark a place name. I would love an explanation from twitter- Any tips?
Social Media | | RR5000
