Moz Q&A is closed.
After more than 13 years, and tens of thousands of questions, Moz Q&A closed on 12th December 2024. Whilst we’re not completely removing the content - many posts will still be possible to view - we have locked both new posts and new replies. More details here.
Is using dots in URL path really a problem?
-
we have a couple of pages displaying a dot in the URL path like
domain.com/mr.smith/widget-mr.smith
It displays fine in chrome, firefox and IE and for the user it may actually look better than replacing it by _ or -.
Did this ever cause problems to anybody?
Any statement from google about it?
Should I change existing URLs?If so, which other characters can I use in the URL instead of underscore and dash, since in our system dash and underscore are already used for rewriting other characters.
Thanks
-
Hi Andrews,
While the difference between dashes and underscores use to be a big issue a few years back its something that seems to hold minimal merit now. The two can be used rather interchangeably without any major impact. This was phased out around the same time as exact-match-domain value was as far too many people were abusing the long-tail dash page method.
-
While I've never come across this exact problem before I can share with you one my mantras that applies here:
"If a system (browser, search engine, etc) needs to perform a data re-write, you aren't accessible enough."
Google loves accessibility. It always wants the user to be able to easily access information and it wants it's spiders to be able to easily index and categorize the information. When accessibility options such as javascript versioning or if a site is using flash or not have an impact then it would only logically follow that more obvious structural access issues do come into effect.
From a technology stand point I can tell you that "." is not traditionally used in the scope of a URL/file structure as it a reserved character and therefore your structure is being re-written to display those. Much like international domains like the chinese internationalized domain name extension .中国 (which is basically a visual re-encode of the unicode: xn--fiqs8s) For the sake of accessibility, proper structure formatting and system practicality you should avoid using non-standard characters such as the . in your url
-
Hi!
As far as I know, this really isn't a huge problem (could be mistaken). I guess it depends...
In regards to readability, I prefer using dashes (-), as they tend to be easier to read. Underscores may be mistaken for a space). Here's what Matt Cutts had to say about this some years ago: http://www.mattcutts.com/blog/whitehat-seo-tips-for-bloggers/ (and http://www.mattcutts.com/blog/dashes-vs-underscores/)
I believe I have read that Google and other search engines read URLs like this when looking for semantic meanings:
- /this-is-part-of-a-website-address = this is part of a website address
- /this_is_part_of_a_website_address = thisispartofawebsiteaddress
At least that used to be the case...It could be changed now.
In your example, I would not obsess too much about it, as it gives perfect semantic meaning. Have you considered removing special characters, instead of replacing them with a "-" ?
Hope this helps.
Best regards,
Anders
Got a burning SEO question?
Subscribe to Moz Pro to gain full access to Q&A, answer questions, and ask your own.
Browse Questions
Explore more categories
-
Moz Tools
Chat with the community about the Moz tools.
-
SEO Tactics
Discuss the SEO process with fellow marketers
-
Community
Discuss industry events, jobs, and news!
-
Digital Marketing
Chat about tactics outside of SEO
-
Research & Trends
Dive into research and trends in the search industry.
-
Support
Connect on product support and feature requests.
Related Questions
-
410 or 301 after URL update?
Hi there, A site i'm working on atm has a thousand "not found" errors on google console (of course, I'm sure there are thousands more it's not showing us!). The issue is a lot of them seem to come from a URL change. Damage has been done, the URLs have been changed and I can't stop that... but as you can imagine, i'm keen to fix as many as humanly possible. I don't want to go mad with 301s - but for external links in, this seems like the best solution? On the other hand, Google is reading internal links that simply aren't there anymore. Is it better to hunt down the new page and 301-it anyway? OR should I 410 and grit my teeth while google crawls and recrawls it, warning me that this page really doesn't exist? Essentially I guess I'm asking, how many 301s are too many and will affect our DA? And what's the best solution for dealing with mass 404 errors - many of which aren't attached or linked to from any other pages anymore? Thanks for any insights 🙂
Intermediate & Advanced SEO | | Fubra0 -
Does google ignore ? in url?
Hi Guys, Have a site which ends ?v=6cc98ba2045f for all its URLs. Example: https://domain.com/products/cashmere/robes/?v=6cc98ba2045f Just wondering does Google ignore what is after the ?. Also any ideas what that is? Cheers.
Intermediate & Advanced SEO | | CarolynSC0 -
Help with facet URLs in Magento
Hi Guys, Wondering if I can get some technical help here... We have our site britishbraces.co.uk , built in Magento. As per eCommerce sites, we have paginated pages throughout. These have rel=next/prev implemented but not correctly ( as it is not in is it in ) - this fix is in process. Our canonicals are currently incorrect as far as I believe, as even when content is filtered, the canonical takes you back to the first page URL. For example, http://www.britishbraces.co.uk/braces/x-style.html?ajaxcatalog=true&brand=380&max=51.19&min=31.19 Canonical to... http://www.britishbraces.co.uk/braces/x-style.html Which I understand to be incorrect. As I want the coloured filtered pages to be indexed ( due to search volume for colour related queries ), but I don't want the price filtered pages to be indexed - I am unsure how to implement the solution? As I understand, because rel=next/prev implemented ( with no View All page ), the rel=canonical is not necessary as Google understands page 1 is the first page in the series. Therefore, once a user has filtered by colour, there should then be a canonical pointing to the coloured filter URL? ( e.g. /product/black ) But when a user filters by price, there should be noindex on those URLs ? Or can this be blocked in robots.txt prior? My head is a little confused here and I know we have an issue because our amount of indexed pages is increasing day by day but to no solution of the facet urls. Can anybody help - apologies in advance if I have confused the matter. Thanks
Intermediate & Advanced SEO | | HappyJackJr0 -
Image URLs - best practice
Hi - I'm assuming image URL best practice follows same principles as non image URLs (not too many files and so on) - I notice alot of web devs putting photos in subdomains, so wonder if I'm missing something (I usually avoid subdomains like the plague)!
Intermediate & Advanced SEO | | McTaggart1 -
Using subdomains for related landing pages?
Seeking subdomain usage and related SEO advice... I'd like to use multiple subdomains for multiple landing pages all with content related to the main root domain. Why?...Cost: so I only have to register one domain. One root domain for better 'branding'. Multiple subdomains that each focus on one specific reason & set of specific keywords people would search a solution to their reason to hire us (or our competition).
Intermediate & Advanced SEO | | nodiffrei0 -
Product URL structure for a marketplace model
Hello All. I run an online marketplace start-up that has around 10000 products listed from around 1000+ sellers. We are a similar model to etsy/ebay in the sense that we provide a platform but sellers to list products and sell them. I have a URL structure question. I have read http://www.seomoz.org/q/how-to-define-best-url-structure-for-product-pages which seems to show everyone suggests to use Products: products/category/product-name Categories: products/category as the structure for product pages. Because we are a marketplace (our category structure has multiple tiers sometimes up to 3) our sellers choose a category for products to go in. How we have handled this before is we have used: Products: products/last-tier-category-chosen/product-name (eg: /products/sweets-and-snacks/fluffy-marshmallows) Categories: products/category (eg: /products/sweets-and-snacks) However we have two issues with this: The categories can sometimes change, or users can change them which means the links completely change and undo any link building work built up. The urls can get a bit long and am worried that the most important data (the fluffy marshmallow that reflects in the page title and content) is left till too late in the URL. As a result we plan to change our URL structure (we are going through a rebuild anyhow so losing old links is not an issue here) so that the new structure was: Products: products/product-name(eg: /products/fluffy-marshmallows) Categories: products/category (eg: /products/sweets-and-snacks) My concern about doing this however, and question here, is whether this willnegatively impact the "structure" of pages when google crawls our marketplace.Because "fluffy marshmallows" will no longer technically fit into the url structure of "sweets and snacks". I dont know if this would have a negative impact or not. FYI etsy (one of the largest marketplace models in the world) us the latter approach and do not have categories in product urls, eg: listing/42003836/vintage-french-industrial-inspired-side Any ideas on this? Many thanks!
Intermediate & Advanced SEO | | LiamPatterson0 -
Is it safe to redirect multiple URLs to a single URL?
Hi, I have an old Wordress website with about 300-400 original pages of content on it. All relating to my company's industry: travel in Africa. It's a legitimate site with travel stories, photos, advice etc. Nothing spammy about. No adverts on it. No affiliates. The site hasn't been updated for a couple of years and we no longer have a need for it. Many of the stories on it are quite out of date. The site has built up a modest Mozrank value over the last 5 years, and has a few hundreds organically achieved inbound links. Recently I set up a swanky new branded website on ExpressionEngine on a new domain. My intention is to: Shut down the old site Focus all attention on building up content on the new website Ask the people linking to the old site to my new site instead (I wonder how many will actually do so...) Where possible, setup a 301 redirect from pages on the old site to their closest match on the new site Setup a 301 redirect from the old site's home page to new site's homepage Sounds good, right? But there is one issue I need some advice on... The old site has about 100 pages that do not have a good match on the new site. These pages are outdated or inferior quality, so it doesn't really make sense to rewrite them and put them on the new site. I call these my "black sheep pages". So... for these "black sheep pages" should I (A) redirect the urls to the new site's homepage (B) redirect the urls the old site's home page (which in turn, redirects to the new site's homepage, or (C) not redirect the urls, and let them die a lonely 404 death? OPTION A: oldsite.com/page1.php -> newsite.com
Intermediate & Advanced SEO | | AndreVanKets
oldsite.com/page2.php -> newsite.com
oldsite.com/page3.php -> newsite.com
oldsite.com/page4.php -> newsite.com
oldsite.com/page5.php -> newsite.com
oldsite.com -> newsite.com OPTION B: oldsite.com/page1.php -> oldsite.com
oldsite.com/page2.php -> oldsite.com
oldsite.com/page3.php -> oldsite.com
oldsite.com/page4.php -> oldsite.com
oldsite.com/page5.php -> oldsite.com
oldsite.com -> newsite.com OPTION 😄 oldsite.com/page1.php : do not redirect, let page 404 and disappear forever
oldsite.com/page2.php : do not redirect, let page 404 and disappear forever
oldsite.com/page3.php : do not redirect, let page 404 and disappear forever
oldsite.com/page4.php : do not redirect, let page 404 and disappear forever
oldsite.com/page5.php : do not redirect, let page 404 and disappear forever
oldsite.com -> newsite.com My intuition tells me that Option A would pass the most "link juice" to my new site, but I am concerned that it could also be seen by Google as a spammy redirect technique. What would you do? Help 😐1 -
How do you implement dynamic SEO-friendly URLs using Ajax without using hashbangs?
We're building a new website platform and are using Ajax as the method for allowing users to select from filters. We want to dynamically insert elements into the URL as the filters are selected so that search engines will index multiple combinations of filters. We're struggling to see how this is possible using symfony framework. We've used www.gizmodo.com as an example of how to achieve SEO and user-friendly URLs but this is only an example of achieving this for static content. We would prefer to go down a route that didn't involve hashbangs if possible. Does anyone have any experience using hashbangs and how it affected their site? Any advice on the above would be gratefully received.
Intermediate & Advanced SEO | | Sayers1