Moz Q&A is closed.
After more than 13 years, and tens of thousands of questions, Moz Q&A closed on 12th December 2024. Whilst we’re not completely removing the content - many posts will still be possible to view - we have locked both new posts and new replies. More details here.
Is using dots in URL path really a problem?
-
we have a couple of pages displaying a dot in the URL path like
domain.com/mr.smith/widget-mr.smith
It displays fine in chrome, firefox and IE and for the user it may actually look better than replacing it by _ or -.
Did this ever cause problems to anybody?
Any statement from google about it?
Should I change existing URLs?If so, which other characters can I use in the URL instead of underscore and dash, since in our system dash and underscore are already used for rewriting other characters.
Thanks
-
Hi Andrews,
While the difference between dashes and underscores use to be a big issue a few years back its something that seems to hold minimal merit now. The two can be used rather interchangeably without any major impact. This was phased out around the same time as exact-match-domain value was as far too many people were abusing the long-tail dash page method.
-
While I've never come across this exact problem before I can share with you one my mantras that applies here:
"If a system (browser, search engine, etc) needs to perform a data re-write, you aren't accessible enough."
Google loves accessibility. It always wants the user to be able to easily access information and it wants it's spiders to be able to easily index and categorize the information. When accessibility options such as javascript versioning or if a site is using flash or not have an impact then it would only logically follow that more obvious structural access issues do come into effect.
From a technology stand point I can tell you that "." is not traditionally used in the scope of a URL/file structure as it a reserved character and therefore your structure is being re-written to display those. Much like international domains like the chinese internationalized domain name extension .中国 (which is basically a visual re-encode of the unicode: xn--fiqs8s) For the sake of accessibility, proper structure formatting and system practicality you should avoid using non-standard characters such as the . in your url
-
Hi!
As far as I know, this really isn't a huge problem (could be mistaken). I guess it depends...
In regards to readability, I prefer using dashes (-), as they tend to be easier to read. Underscores may be mistaken for a space). Here's what Matt Cutts had to say about this some years ago: http://www.mattcutts.com/blog/whitehat-seo-tips-for-bloggers/ (and http://www.mattcutts.com/blog/dashes-vs-underscores/)
I believe I have read that Google and other search engines read URLs like this when looking for semantic meanings:
- /this-is-part-of-a-website-address = this is part of a website address
- /this_is_part_of_a_website_address = thisispartofawebsiteaddress
At least that used to be the case...It could be changed now.
In your example, I would not obsess too much about it, as it gives perfect semantic meaning. Have you considered removing special characters, instead of replacing them with a "-" ?
Hope this helps.
Best regards,
Anders
Got a burning SEO question?
Subscribe to Moz Pro to gain full access to Q&A, answer questions, and ask your own.
Browse Questions
Explore more categories
-
Moz Tools
Chat with the community about the Moz tools.
-
SEO Tactics
Discuss the SEO process with fellow marketers
-
Community
Discuss industry events, jobs, and news!
-
Digital Marketing
Chat about tactics outside of SEO
-
Research & Trends
Dive into research and trends in the search industry.
-
Support
Connect on product support and feature requests.
Related Questions
-
Can some sort of wildcard redirect be used on a single folder path?
We have a directory with thousands of pages and we are migrating the entire site to another root URL. These folder paths will not change on the new site, but we don't want to use a wildcard to redirect EVERYTHING to the same folder path on the new site. Setting up manual 301 redirects on this particular directory would be crazy. Is there a way to isolate something like a wildcard redirect to apply only to a specific folder? Thanks!
Intermediate & Advanced SEO | | MJTrevens0 -
410 or 301 after URL update?
Hi there, A site i'm working on atm has a thousand "not found" errors on google console (of course, I'm sure there are thousands more it's not showing us!). The issue is a lot of them seem to come from a URL change. Damage has been done, the URLs have been changed and I can't stop that... but as you can imagine, i'm keen to fix as many as humanly possible. I don't want to go mad with 301s - but for external links in, this seems like the best solution? On the other hand, Google is reading internal links that simply aren't there anymore. Is it better to hunt down the new page and 301-it anyway? OR should I 410 and grit my teeth while google crawls and recrawls it, warning me that this page really doesn't exist? Essentially I guess I'm asking, how many 301s are too many and will affect our DA? And what's the best solution for dealing with mass 404 errors - many of which aren't attached or linked to from any other pages anymore? Thanks for any insights 🙂
Intermediate & Advanced SEO | | Fubra0 -
Mass URL changes and redirecting those old URLS to the new. What is SEO Risk and best practices?
Hello good people of the MOZ community, I am looking to do a mass edit of URLS on content pages within our sites. The way these were initially setup was to be unique by having the date in the URL which was a few years ago and can make evergreen content now seem dated. The new URLS would follow a better folder path style naming convention and would be way better URLS overall. Some examples of the **old **URLS would be https://www.inlineskates.com/Buying-Guide-for-Inline-Skates/buying-guide-9-17-2012,default,pg.html
Intermediate & Advanced SEO | | kirin44355
https://www.inlineskates.com/Buying-Guide-for-Kids-Inline-Skates/buying-guide-11-13-2012,default,pg.html
https://www.inlineskates.com/Buying-Guide-for-Inline-Hockey-Skates/buying-guide-9-3-2012,default,pg.html
https://www.inlineskates.com/Buying-Guide-for-Aggressive-Skates/buying-guide-7-19-2012,default,pg.html The new URLS would look like this which would be a great improvement https://www.inlineskates.com/Learn/Buying-Guide-for-Inline-Skates,default,pg.html
https://www.inlineskates.com/Learn/Buying-Guide-for-Kids-Inline-Skates,default,pg.html
https://www.inlineskates.com/Learn/Buying-Guide-for-Inline-Hockey-Skates,default,pg.html
https://www.inlineskates.com/Learn/Buying-Guide-for-Aggressive-Skates,default,pg.html My worry is that we do rank fairly well organically for some of the content and don't want to anger the google machine. The way I would be doing the process would be to edit the URLS to the new layout, then do the redirect for them and push live. Is there a great SEO risk to doing this?
Is there a way to do a mass "Fetch as googlebot" to reindex these if I do say 50 a day? I only see the ability to do 1 URL at a time in the webmaster backend.
Is there anything else I am missing? I believe this change would overall be good in the long run but do not want to take a huge hit initially by doing something incorrectly. This would be done on 5- to a couple hundred links across various sites I manage. Thanks in advance,
Chris Gorski0 -
Problem with redirects in coldfusion
How to redirect pages in cold fusion? If using ColdFusion and modrewrite, the URL will never be redirected from ModRewrite.
Intermediate & Advanced SEO | | alexkatalkin0 -
Is it a problem to use a 301 redirect to a 404 error page, instead of serving directly a 404 page?
We are building URLs dynamically with apache rewrite.
Intermediate & Advanced SEO | | lcourse
When we detect that an URL is matching some valid patterns, we serve a script which then may detect that the combination of parameters in the URL does not exist. If this happens we produce a 301 redirect to another URL which serves a 404 error page, So my doubt is the following: Do I have to worry about not serving directly an 404, but redirecting (301) to a 404 page? Will this lead to the erroneous original URL staying longer in the google index than if I would serve directly a 404? Some context. It is a site with about 200.000 web pages and we have currently 90.000 404 errors reported in webmaster tools (even though only 600 detected last month).0 -
301 Redirection and apostrophes in URLs
Hi I am experiencing trouble getting any redirects with apostrophes in the URLs to 301 redirect in order to eliminate 404 errors. I have tried replacing the instance of the apostrophe in the source URL field to %27 and variations of this but to no avail. The site is a wordpress site (the old URLS are legacies from the old Business Catalyst site) and I am using the redirection plug in. I have gone into some detail with a helpful soul here http://wordpress.org/support/topic/how-to-deal-with-apostrophes-in-source-url but unfortunately to no result. If anyone has any idea how to solve this puzzle I would be grateful for the help. Example: http://www.tesselaars.com/blog/Inside_Flowers/post/Online_Marketing_for_Florists_Part_1%E2%80%93_A_Website_You_Won%27t_Regret/
Intermediate & Advanced SEO | | Seamoose0 -
Where to put a page ID in a URL?
Hello, My company is going to change URLs to example.com/category or example.com/product. When we will change the URLs to product or category pages somehow we have to check whether the requested page is from category table in DB or from products table (this gives much speed to page load time). So we have to choose how to make the different product and category pages.
Intermediate & Advanced SEO | | komeksimas
Programmers said that we need to insert id to URL. So the question is: Which is the better way to place an id to an URL? example.com/product-name?id=111 example.com/product-name/111 example.com/product_name-111 Or maybe we should use some other punctuation mark to separate id from product name? p.s. I have read Dynamic URLs vs. static URLs by Google and it still didn't answered which is the best for all of the pages. Somehow others solve this problem by typing only the names to the URL, but could anyone tell what that technology should be?0 -
Url with hypen or.co?
Given a choice, for your #1 keyword, would you pick a .com with one or two hypens? (chicago-real-estate.com) or a .co with the full name as the url (chicagorealestate.co)? Is there an accepted best practice regarding hypenated urls and/or decent results regarding the effectiveness of the.co? Thank you in advance!
Intermediate & Advanced SEO | | joechicago0