Moz Q&A is closed.
After more than 13 years, and tens of thousands of questions, Moz Q&A closed on 12th December 2024. Whilst we’re not completely removing the content - many posts will still be possible to view - we have locked both new posts and new replies. More details here.
Is there a way to find out who the admin of a Google Analytics account is?
-
We have a client who has been searching high and low to gain access to the GA account that is tied to their website, but previous agencies keep stating they don't have access. Is there a way to find out who the admins are on a GA account with the tracking number so we can reach out to that person and ask them to admin the client?
-
I found that this is the most up to date support information provided by Google when looking to regain access to an analytics account... https://support.google.com/analytics/troubleshooter/7264014?hl=en#ts=7271146
-
Hi,
I don't know whether your issue resolved or not by following either of above suggestion. This time I am sharing a Googler's post on exact issue. Please have a look.
Thanks
-
Hi,
I have find an article on this and after reading I find author explained step by step process to reclaim your Google Analytics Account.
http://savvydealer.com/reclaim-your-google-analytics-account/
Thanks
-
Have you tried searching the account number to see what other websites (if any) are using that account? If you client's UA number does not end in a -1 then there is a good chance whomever made the site used the same account for all of the work they did, including their own site.
-
Try to contact somebody at Google - best way to access them is via Adwords; if you still have access to the Adwords account you can try the contact us under the help function. A good how to can be found here: http://www.brettasnyder.com/blog/reclaim-google-analytics-account-access/ (not sure if all the steps are still possible).
Alternative is try to call Google Adwords directly - phone numbers are here https://support.google.com/adwords/answer/1385067?hl=en-GB&authuser=0 or probably even better - if you know somebody at Google - try to get some help from him.
Hope this helps,
Dirk
-
Hi,
I don't think there is a way to find out who the admin is since Google is not providing an option for that at the moment. However, if you have an Account Rep for Adwords or any Google products, you can contact that person and your rep should be able to direct you to the right person. If not, you can always reach out to analytics-support@google.com and they should be able to help you contact the admin since they're not able to provide you with the email due to privacy issues.
Hope this helps.
Got a burning SEO question?
Subscribe to Moz Pro to gain full access to Q&A, answer questions, and ask your own.
Browse Questions
Explore more categories
-
Moz Tools
Chat with the community about the Moz tools.
-
SEO Tactics
Discuss the SEO process with fellow marketers
-
Community
Discuss industry events, jobs, and news!
-
Digital Marketing
Chat about tactics outside of SEO
-
Research & Trends
Dive into research and trends in the search industry.
-
Support
Connect on product support and feature requests.
Related Questions
-
Whatstuffwherebot user agent messing up Google Analytics
Starting yesterday, Aug 26, 2020, I noticed a new bot crawling our site with user agent whatstuffwherebot. Google Analytics is counting these hits as human traffic, completely throwing off my numbers - yesterday, Analytics reported nearly triple my typical number of visitors. As of now, Search Console only shows data through Aug 25 so I don't know if Search Console is also affected. Is anybody else seeing something similar? Does anybody know what the whatstuffwherebot bot is? I don't get any results when I search on Google or Bing. For what it's worth, the traffic is coming from Columbus, OH, running over Amazon AWS via 278 different IP addresses so far. Also, WordFence (my WordPress security plugin) correctly identifies these hits as bot traffic.
Reporting & Analytics | | ahirai0 -
Is there a way to filter all computers on a specific IPv6 network in Google Analytics?
Is there a quick way of filtering the IP addresses for all the computers on a network that's using IPv6? I want to filter out visits to our websites from the devices on our office network, but each computer (and phone and tablet) seems to have a different address. It _looks _like they all start the same way, though. One computer is xxxx:xxxx:xxxx:xxxx:aaaa:aaaa:aaaa:aaaa, another is xxxx:xxxx:xxxx:xxxx:bbbb:bbbb:bbbb:bbbb, my phone is xxxx:xxxx:xxxx:xxxx:cccc:cccc:cccc:cccc, etc. Does this mean that xxxx:xxxx:xxxx:xxxx is the address for our network as a whole, and I can just set up a Google Analytics filter for "IP addresses starting with..."? Or would doing that also filter out hits from, like, every visitor within a 20 mile radius of our office? If I need to simply put in the individual addresses for each and every device, I will. I'm just hoping it doesn't come to that. Thanks!
Reporting & Analytics | | BrianAlpert780 -
Tasks for Google Analytics training
Hi Mozzers, I'm delivering some Google Analytics (Fundamentals level) training, and trying to make it was fun and as interesting as possible... which is quite a challenge when it comes to GA. I was just wondering if you're aware of training tasks, or interactions, I could bring into this kind of training session? The group are particularly interested in user journeys and the effectiveness of content. Thanks!
Reporting & Analytics | | A_Q0 -
Google Analytics - Average Position
Hi Just trying to get some clarity on Google Analytics Average Positions in "Aquistions/Search Engine Optimisation". For a very competitive keyword Google Analytics is saying i am on average position of 6. Is this Page 6? I am assuming position six would be 1.6?
Reporting & Analytics | | Cocoonfxmedia0 -
Can you track two Google Analytics Accounts on one site?
If you have a site that had an old analytics account and then implemented a new one is it possible to run tracking code that records to both accounts without causing your site or data issues? We are doing this so we don't loose data at any point - ideally it wouldn't have been split between the two but making one redundant isn't an option. Ideally we would have merged the data from both accounts and had one - however the research we have done points to this not being a possibility - unless one of you guys knows different? It would be great if anyone has experience on any this.. Thanks
Reporting & Analytics | | ChrisAllbones0 -
Google Analytics - Keywords (not set) or ( not provided) WHY???
In Analytics, most of my visitors are landing on my home page, but when trying to see wich keywords they use, most of them are: (not set) or ( not provided) See screencast: http://screencast.com/t/AKwPW76qLVsN Can you tell why? What is going on? Is there a way to solve this? Thank you, BigBlaze
Reporting & Analytics | | BigBlaze2050 -
Google Analytics and DNS change
Our new alumni application is going be tested at domain uva.imodules.com . We are going to collect traffic data with a Google analytics account number UA-884652-XX. So going to uva.imodules.com/myPage.html would send its data to Google Analytics with that account number. Then when it is ready for production we are going to just change the domain name of the application and switch the DNS over to dardencommunity.darden.virginia.edu . So going to dardencommunity.darden.virginia.edu /myPage.html would send its data to Google Analtics with that SAME account number. Aside from having the testing domain data in the same profile are there any other issues/problems we may run into?
Reporting & Analytics | | Darden0 -
Totally Remove "localhost" entries from Google Analytics
Hello All, In Google Analytics I see a bunch of traffic coming from "localhost:4444 / referral". I had tried once before to create a filter to exclude this traffic source, but obviously I did it wrong since it's still showing up. Here is the filter I have currently: Filter Name: Exclude localhost
Reporting & Analytics | | Robert-B
Filter Type: Custom filter > Exclude
Filter Field: Referral
Filter Pattern: .localhost:4444.
Case Sensitive: No Can anyone see what I'm doing wrong and give me a push in the right direction? Thanks in advance!0