Moz Q&A is closed.
After more than 13 years, and tens of thousands of questions, Moz Q&A closed on 12th December 2024. Whilst we’re not completely removing the content - many posts will still be possible to view - we have locked both new posts and new replies. More details here.
Google My Business - bulk location upload vs. single upload
-
Hi there,
I have a question regarding Google My Business listings: We currently have a business with few offices (less than 10). Each office has it's Google listing under the same Google account.
We plan on opening new offices at a certain pace, let's say two a month, which means we'll have more than 10 listings in the near future.
As far as I recall, Google allows up to 10 listings per account, which means it won't suffice. On the other hand, We do not have 10 offices at the time being, which means we're not eligible for a bulk upload.Any ideas how to handle this situation?
-
Hi Gal,
Yes as far as i remember this is the process. You do not need to be uploading 10 NEW listings to request the bulk verification feature, you just need to have more than 10 locations in total. The bulk verification happens at the account level, not on an individual location level - if that makes sense.
-
Thanks for the response, Lynn!
Just to make sure I got it right: Let's say I reached 10 listings which I verified individually and now I want to open and verify 5 new listings. Can I submit the current listings I have in the bulk process, even though they have already been verified? Otherwise, I'm not reaching the minimum 10 listings required for the bulk verification.
-
Hi,
I believe the limit on local listings per account is 100, not 10 (see here), so you will be ok for a while yet. Since you are not eligible for bulk upload/verification the only option at the moment is to input your local listings individually as usual and verify them individually also. You can then add new locations as they become available and once you are over the 10 locations limit you can initiate the bulk verification request following the instructions here. There is no disadvantage in this process, you don't 'lose' anything starting out with less than 10 locations and then moving above that number and bulk verifying so nothing to worry about!
Got a burning SEO question?
Subscribe to Moz Pro to gain full access to Q&A, answer questions, and ask your own.
Browse Questions
Explore more categories
-
Moz Tools
Chat with the community about the Moz tools.
-
SEO Tactics
Discuss the SEO process with fellow marketers
-
Community
Discuss industry events, jobs, and news!
-
Digital Marketing
Chat about tactics outside of SEO
-
Research & Trends
Dive into research and trends in the search industry.
-
Support
Connect on product support and feature requests.
Related Questions
-
Adding Schema to multi-location Wordpress Website using Schema Pro
All, we're building a new version of our existing website using Wordpress and have both Yoast SEO Premium and Schema Pro installed. Our site has 70, a medical practice, has 70 different locations. Each one of our locations has a page tile like the following: "Los Angeles | ABC Dental". The first part of the site title is the town we're located in followed by our site name. Using Schema Pro, we're not sure about what to place into the "Name" field. You can see the direction from Schema Pro for local businesses here, https://wpschema.com/docs/add-schema-markup-for-a-local-business-page/ By default Schema Pro has the name field set to Site Title. However, using this on all 70 or our landing pages wouldn't provide the local aspect we want. It would just say ABC Dental. We changed this to use a new custom field where we could enter a more descriptive name. Using our page title example of "Los Angeles | ABC Dental", would we simply enter this into the name field of Schema Pro? If not, would we format this another way such as "ABC Dental Los Angeles" We could use some help in a strategy for Schema markup for multi-location businesses, in particular, the name field. All other information such as address, phone number, etc seems rather straight forward. Thank you for the assistance
Local Listings | | morciuoli0 -
Google My Business: Company listing is showing in search instead of division address - similar names/same city
Hi! I have a client whose company name is very similar to one if their company divisions. This division has multiple locations but its main location is in the same city as the parent company. The problem is that when you search for the division, the parent company shows up. The parent company has a physical address, but most users searching need to be going to the division address which takes customers. They are having problems with customers coming to the parent company address instead. I have made the Google My Business parent company page to show service areas instead of their business address. Yet, their listing still comes up first when searching for the division location. This is because of part of the parent company name is in the division name. My client wants users to be able to find the division more so than the parent company. Anyone had this issue before? Any tips would be great!
Local Listings | | agrier0 -
GMB 'Located In' Feature
Hello - can anyone provide some guidance on how to remove a 'Located in' field from a GMB listing? This has appeared in a client's GMB listing - but the other location is separate and so it is not applicable. I have worked out how to add a 'Located in' feature - but not remove it. Appreciate any help.
Local Listings | | P.Myers0 -
How do you fix a Google My Business Location Issue if the road doesn't yet exist on Google Maps?
My core question is just: How do you fix a Google My Business Location Issue if the road doesn't yet exist on Google Maps? Do I have any other options other than to just wait on Google to catch up with reality? Here's the background: I work for a hospital. We just opened a clinic on a street that is real and has a U.S. Postal Address, but Google Maps doesn't recognize it, and redirects people to a house . This is our postal address: 8343 S 168th Ave Omaha NE 68136-1677 If a patient enters the following into google maps, 8343 S 168th Ave, the location the map autofills the wrong zip code, and sends them to a home that is on S 168th Ave. (where in theory a home would exist if it had that home number). The road does exist in that portion of town. If a patient enters 8343 S 168th Ave, Omaha NE 68136, google maps takes you to the correct location, but it automatically changes Ave to St. The verified Google My Business listing also lists it as Street, even though on the back end I've put in the word Avenue, and it shows up in the right place. If however someone just searches by name "Chalco Clinic" the right Google My Business comes up. This is the Google My Business page I'm referring to: https://www.google.com/maps/place/Nebraska+Medicine+-+Chalco/@41.1754796,-96.1787153,15z/data=!4m5!3m4!1s0x0:0xf77aefb4e27f865!8m2!3d41.1754796!4d-96.1787153 And even though it says it's on a Street, on the back end of the claimed listing I've used "Avenue". In case it matters, this is the landing page for the location: https://www.nebraskamed.com/chalco
Local Listings | | Patrick_at_Nebraska_Medicine0 -
For Google's Structured Data, should I change my listings from Product schema to Local Business schema?
I was reading Google's Structured Data spec, and I'm considering changing the schema of our listing pages from the Product schema to the Local Business schema. Is this a good idea? To give you a little more info, the pages that I'm classifying are listings for physical spaces that our website rents out for activities, such as meetings. Here's an example of a listing: https://www.peerspace.com/pages/listings/550ddcde2f352d0800fc186b Our goal is to add the proper schema.org tags to the page so that our spaces show up in local searches, such as "meeting space in San Francisco." The problem is that when we add location microdata (addressLocality, addressRegion, etc.) to our current "Product" schema, Google tells us that "Products" can't have a location. However, we aren't quite a "Local Business" either, since we don't publicly share our space's street addresses—only the space's neighborhood/city/state for privacy reasons. As a result, we get an error from Google's Structured Data Tool as a "Local Business" page because "streetAddress" is required for Local Businesses. Should we switch to the Local Business schema anyway, even though we get structured data errors for streetAddress? Or is it better not to include the location information in the microdata so that we don't have errors? Does Google penalize you for incomplete tags? Any input is appreciated!
Local Listings | | stuartstein0 -
Google Places - Remove Completely vs. Permanently Closed?
This is a bit confusing to explain so bear with me please. We have a client that used to have an old law practice with a partner. The site and backlinks were very large and it had a lot of domain authority. It also had a very large citation profile and history. The two lawyers have since split, but there remains multiple Google Places listings out there for the old partnership. We have fixed the one showing the old business practice name, but not the one that he setup for his personal name. One of the biggest hassles is that the old location he setup has his attorney name in the actual listing. The issue is that we cannot close the old listing (we tried this), as it comes up permanently closed when you Google his name. If you search for his new Law Firm, the correct business listing that we have set up will show. The new listing also includes his name and has over 50 five star reviews. We hoped that the large amount of legitimate reviews would get rid of or at least suppress the old listing, but it is not happening. So I am a bit confused as to what to do. If we close the old listing Google shows the red "permanently closed" listing when you Google his name. We cannot update the old listing information to show his new address as then it will compete with the new listing that we setup that shows all the positive reviews. The old listing was not created by us, and the new one was. The new one shows when you search for his Law Firm name in Google, but not for his personal name i.e "NAME HERE ATTORNEY" or "HIS NAME and LOCATION" Interested to hear your thoughts. The only way I can think to fix this is to contact Google directly and see if there is a way to permanently delete the listing from Google maps, but I am not aware that this is possible.
Local Listings | | David-Kley0 -
Citation building for multiple locations
Hey everyone, I think i've got a good handle on citations, but had a question regarding multiple locations. I'm going to be doing citation building for a local lawyer, and he's got 4 locations. I'd like to build citations for each of his locations, but I was wondering if the business name needs to change? Ie. If I am building citations for Town 2 and Town 3, should the business name be listed as "Company Name Town 1" for the first location, and "Company Name Town 2" for the second? Or is it fine to use the company name throughout all citations, and just change the location/phone number to the location based info? I'm just worried about Google seeing differing info, but the same company name, and possibly penalizing me for it. Thanks in advance!
Local Listings | | RCDesign740 -
Google My Business- Will a large service area dilute local search results?
I am considering adding our actual service area to our Google My Business profile, but I don't want this to dilute our local search results. As it is, we come up in the top 3 or so when searched in our HQ's city and several nearby cities when you search for us in Google Maps (although when I look at the top 10 organic for Google for some reason when you search for these cities + our keywords Google doesn't show any local results). Our actual service area is fairly large, comprising the states of CA & Hawaii & parts of CO, AZ, and UT. I would be adding the service area by zip code rather than radius, as a radius wouldn't make any sense in this case (particularly considering the distance between HI and CA). Is it better to keep our relatively high ranking in local results? Will adding the service area not affect local results negatively? Also, do you know why Google isn't showing me local results when I look for our keywords + our nearby cities? When I look for these keywords in larger cities like LA or San Diego, Google always shows me local results.
Local Listings | | BohmKalish1230