Moz Q&A is closed.
After more than 13 years, and tens of thousands of questions, Moz Q&A closed on 12th December 2024. Whilst we’re not completely removing the content - many posts will still be possible to view - we have locked both new posts and new replies. More details here.
Url shows up in "Inurl' but not when using time parameters
-
Hey everybody,
I have been testing the Inurl: feature of Google to try and gauge how long ago Google indexed our page. SO, this brings my question.
If we run inurl:https://mysite.com all of our domains show up.
If we run inurl:https://mysite.com/specialpage the domain shows up as being indexed
If I use the "&as_qdr=y15" string to the URL, https://mysite.com/specialpage does not show up.
Does anybody have any experience with this? Also on the same note when I look at how many pages Google has indexed it is about half of the pages we see on our backend/sitemap. Any thoughts would be appreciated.
TY!
-
There are several ways to do this, some are more accurate than others. If you have access to the site which contain the web-page on Google Analytics, obviously you could filter your view down to one page / landing page and see when the specified page first got traffic (sessions / users). Note that if a page existed for a long time before it saw much usage, this wouldn't be very accurate.
If it's a WordPress site which you have access to, edit the page and check the published date and / or revision history. If it's a post of some kind then it may displays its publishing date on the front-end without you even having to log in. Note that if some content has been migrated from a previous WordPress site and the publishing dates have not been updated, this may not be wholly accurate either.
You can see when the WayBack Machine first archived the specified URL. The WayBack Machine uses a crawler which is always discovering new pages, not necessarily on the date(s) they were created (so this method can't be trusted 100% either)
In reality, even using the "inurl:" and "&as_qdr=y15" operators will only tell you when Google first saw a web-page, it won't tell you how old the page is. Web pages do not record their age in their coding, so in a way your quest is impossible (if you want to be 100% accurate)
-
So, then I will pose a different question to you. How would you determine the age of a page?
-
Oh ty! Ill try that out!
-
Not sure on the date / time querying aspect, but instead of using "inurl:https://mysite.com" you might have better luck checking indexation via "site:mysite.com" (don't put in subdomains, www or protocol like HTTP / HTTPS)
Then be sure to tell Google to 'include' omitted results (if that notification shows up, sometimes it does - sometimes it doesn't!)
You can also use Google Search Console to check indexed pages:
- https://d.pr/i/oKcHzS.png (screenshot)
- https://d.pr/i/qvKhPa.png (screenshot)
You can only see the top 1,000 - but it does give you a count of all the indexed pages. I am pretty sure you could get more than 1k pages out of it, if you used the filter function repeatedly (taking less than 1k URLs from each site-area at a time)
Got a burning SEO question?
Subscribe to Moz Pro to gain full access to Q&A, answer questions, and ask your own.
Browse Questions
Explore more categories
-
Moz Tools
Chat with the community about the Moz tools.
-
SEO Tactics
Discuss the SEO process with fellow marketers
-
Community
Discuss industry events, jobs, and news!
-
Digital Marketing
Chat about tactics outside of SEO
-
Research & Trends
Dive into research and trends in the search industry.
-
Support
Connect on product support and feature requests.
Related Questions
-
Why do I have 2 different URL's for the same page - is this good practice?
Hi GuysMy father is currently using a programmer to build his new site. Knowing a little about SEO etc, I was a little suspicious of the work carried out. **Anyone with good programming and SEO knowledge, please offer your advice!**This page http://www.thewoodgalleries.co.uk/gallery-range-wood-flooring/ which is soon to be http://www.thewoodgalleries.co.uk/engineered-wood/ you'll see has a number of different products. The products on this particular page have been built into colour categories like thishttp://www.thewoodgalleries.co.uk/engineered-wood/lights-greys http://www.thewoodgalleries.co.uk/engineered-wood/beiges http://www.thewoodgalleries.co.uk/engineered-wood/browns http://www.thewoodgalleries.co.uk/engineered-wood/darks-blacks This is fine. Eventually when we add to our selection of woods, we'll easily segment each product into "colour categories" for users to easily navigate to. My question is - Why do I have 2 different URL's for the same page - is this good practice? Please see below... Visible URL - http://www.thewoodgalleries.co.uk/engineered-wood/browns/cipressa/Below is the permalink seen in Word Press for this page also.Permalink: http://www.thewoodgalleries.co.uk/engineered-wood/browns-engineered-wood/cipressa/and in the Word Press snippet shows the same permalink urlCipressa | Engineered Brown Wood | The Wood Gallerieswww.thewoodgalleries.co.uk/engineered-wood/browns-engineered-wood/cipressa/ Buy Cipressa Engineered Brown Wood, available at The Wood Galleries, London. Provides an Exceptional Foundation for Elegant Décor, Extravagant .. If this is completely ok and has no negative search impact - then I'm happy. If not what should I advise to my programmer to do? Your help would be very much appreciated. Regards Faye
On-Page Optimization | | Faye2340 -
How important are clean URLs?
Just wanting to understand the importance of clean URLs in regards to SEO effectiveness. Currently, we have URLs for a site that reads as follows: http://www.interhampers.com.au/c/90/Corporate Gift Hampers Should we look into modifying this so that the URL does not have % or figures?
On-Page Optimization | | Gavo1 -
URL Domain Used in Meta Description
Today I was asked if using a domain url in your meta description can have a negative impact on your website. This description includes a list of the homepage url, but directs visitors to a different internal page of the website. My concern fell with directing visitors to a different page of the site, but promoting the homepage in the description/snippet. With Penguin 2.1 release on the 4th, I'm very cautious of my links/urls. What are your thoughts behind this? What are the possible, if any negative impacts this could have on a site? This URL does have a brand name as so the Title.
On-Page Optimization | | flcity150 -
URL for location pages
Hello all We would like to create clean, easy URLs for our large list of Location pages. If there are a few URLs for each of the pages, am I right when I'm saying we would like this to be the canonical? Right now we would like the URL to be: For example
On-Page Optimization | | Ferguson
Domain.com/locations/Columbus I have found some instances where there might be 2,3 or more locations in the same city,zip. My conclusion for these would be: adding their Branch id's on to the URL
Domain.com/locations/Columbus/0304 Is this an okay approach? We are unsure if the URL should have city,State,zip for SEO purposes?
The pages will have all of this info in it's content
BUT what would be best for SEO and ranking for a given location? Thank you for any info!0 -
Rel="canonical" on home page?
I'm using wordpress and the all in one seo pack with the canonical option checked. As I understand it the rel="canonical" tag should be added to pages that are duplicate or similar to tell google that another page (one without the rel="canonical" tag) is the correct one as the url in the tag is pointing google towards it. Why then does the all in one seo pack add rel="canonical" to every page on my site including the home page? Isn't that confusing for google?
On-Page Optimization | | SamCUK0 -
"And" vs "&"
I blog for hotels and I am wondering whether it is best to have on a wordpress tagline the name of the hotel such as Holiday Inn and Suites vs Holiday Inn & Suites. In Google AdWords, the "and" keyword always beats out the "&" word in exact search. The "&" just always looks cleaner. Also, when I refer to the hotel within a blog post, should I use the "and" or "&" in the name? Please help me understand which is best for seo. Thank you!
On-Page Optimization | | lwilkins0 -
Does having a "+" in a URL hurt SEO? Would much value be gained changing it to a hyphen?
There's a site that contains "+" signs in the URL in order to call different information for the content on the page. Would it be better to change those to hyphens (-), or not that much value will be gained, so leave them as is? Thanks!
On-Page Optimization | | MitchellStoker0 -
Alt tag using photoshop
Simple question i think. Ive started adding alt tags to images using the slice tool in photoshop. This takes up a menu were the last part of is alt tag: This way to add alt tags does work right? I used SEO-browser afterwards and couldnt see the tag. There are maybe other better ways to see if your tags are in there ? Dan L.
On-Page Optimization | | danlae0