Moz Q&A is closed.
After more than 13 years, and tens of thousands of questions, Moz Q&A closed on 12th December 2024. Whilst we’re not completely removing the content - many posts will still be possible to view - we have locked both new posts and new replies. More details here.
How many hyphens are allowed in page titles or image names?
-
When I was going through certification, I was told it should be limited to one or two. I was curious if there is a change.
-
Hi KP
There really is no limit but URL's with many hyphens tend to look spammy.
Remember the old days of long partial match URLs? www.cheap-car-insurance-for-u.com? and suchlike? They just look really crappy. If you really must use one in the TLD then limit it to one.
For Pages & Posts, it's quite common to see more use of hyphens. I'm editor at a music blog and it's quite common to see for example:
sitename.com/the-rolling-stones-manchester-live-review It looks natural even though there is a stop word in the URL because 'The' is actually part of the Stones' name
You will get a warning in Moz because of the long URL but it will not stop it ranking well, at all!
For images, it depends on how descriptive you want it to be. If the image was of Mick Jagger in Manchester then the image URL could easily be sitename**/mick-jagger-manchester-old-trafford** and then the Title or Alt text tag would be 'Mick Jagger - Manchester - Old Trafford, so highly descriptive with a couple of hyphens and great for image SEO.
So it's up to you really - the more descriptive the better. Ignore warnings of long URLs unless they are stupidly long and focus on enhancing the ranking of the page rather than worry about minutiae.
Now:
If you are talking about Meta Titles then it's common to use a variety of separators such as a hyphen (-) or a bar (|). In that case, it's fairly simple as you need Primary Keyword - Secondary Keyword - Sitename so they are often limited to just two.
I think the more you use them the less space there is for Keywords and it's important with a limited length (60-70 characters) to get those in as a priority. The hyphen takes up 3 characters so they are largely a waste of space.
I hope that helps
Regards Nigel
-
Hello there,
If you're talking about the name of image files such as jpg and png where hyphens are used as space (just like you did on page url), there's really no limit given by Google, so my advice would be not to over optimize those image files by stuffing your keywords in it (ie, keyword1-keyword2-keyword3-keyword4.jpg), just make it natural (puppy-food.jpg) instead.
As for Page Titles like Gaston suggested to use it as a separator (personally I prefer | or : ), and again there's no actual limit given by Google, but the key here is to make sure these are optimized for your visitor then only Google. Just make sure they're natural then you should be fine.
Hope this helps,
Joseph Yap
-
Hi there!
There is no such restriction on the amount of hyphens. Usually there are one or two, used as separators in titles. Never seen them in image titles.
Hope it helps.
Best luck.
GR.
Got a burning SEO question?
Subscribe to Moz Pro to gain full access to Q&A, answer questions, and ask your own.
Browse Questions
Explore more categories
-
Moz Tools
Chat with the community about the Moz tools.
-
SEO Tactics
Discuss the SEO process with fellow marketers
-
Community
Discuss industry events, jobs, and news!
-
Digital Marketing
Chat about tactics outside of SEO
-
Research & Trends
Dive into research and trends in the search industry.
-
Support
Connect on product support and feature requests.
Related Questions
-
To hyphenate or not to hyphenate?
Quick question: does Google differentiate between terms that correctly include a hyphen (such as "royalty-free") and those that are incorrect ("royalty free")? I ask because the correct term "royalty-free"(with a hyphen) receives far less monthly traffic for the same term without the hyphen (according to Moz): Term | Estimated traffic
On-Page Optimization | | JCN-SBWD
"royalty free music" | 11.5-30.3K
"royalty-free music" | 501-850 If Moz views the terms separately then I'd guess that Google does too, in which case the best thing to do for SEO (and increased site traffic) would be to wrongly use "royalty free" without the hyphen. Is that correct?0 -
Can I put the company name in the image alt text instead of just the service type im trying to rank for?
Hello, if I am trying to rank for a service type and the exact phrase is in the companies name, can I put the company name in the image alt text instead of just the service type? Seizing the opportunity to get another mention of the businesses name...two birds with the one stone if you will... For example, "lawn cutting" being the service type but the company's name is Paul's lawn cutting. Could i put Pauls Lawn Cutting in the image alt text, or just stick to lawn cutting? Thanks in advance
On-Page Optimization | | Gavinn0 -
Getting the Titles and Headings Right on Product Pages. Userbility vs SEO
Hey Mozzers, I am optimising a chaotic section of the site including many similar products. Writing unique content etc. The titles and urls were all over the place so my first job was to tidy them up so I could make some sense of the situation, especially as sometimes they didn't even match! I should point out were on Magento, so product name = Both the Heading and Title of the page, the meta title can be set separately. When i refer to title I mean both <title>and <h1></strong><br /><br />Before they existed as such<br />URL: domain.com/200-x-0-5-g-rs-232-balance.html<br />TItle: PC-1234 200 x 0.5g x 0.3 RS-232 Balance<br /><br />This format was (Product Code, Capacities, Resolutions, Accuracy, Product Title)<br /><br />The issue was all 60 products in a page followed this format. Navigating through the page was a nightmare and was just a jumble of numbers and highly confusing even to me who learnt what they all mean, especially when you had 8 products from the same range you got presented with<br /><br />APC-1234 200 x 0.5g x 0.3 RS-232 Balance<br />APC-1235 500 x 1g x 0.3 RS-232 Balance<br />APC-1236 1000 x 2g x 0.3 RS-232 Balance<br />APC-1238 5000 x 10g x 0.3 RS-232 Balance<br />APC-1239 10000 x 15g x 0.3 RS-232 Balance<br />APC-1210 20000 x 25g x 0.3 RS-232 Balance<br />APC-1211 50000 x 50g x 0.3 RS-232 Balance</p> <p>I changed them to something more user friendly.<br /><br />URL: domain.com/200g-precision-balance.html<br />Title: 200g Precision Balance<br /><br />This has seen the following benefits<br />- URL is now clear and means something to the user<br />- Product titles are easy to navigate and the page is more pleasing to the eye<br />- The jumble of numbers in the title are now all labelled and shown below each product listing in bullet point so the user can see the basic spec of a product without having to decipher any titles<br /><br />Upon reflection I has a couple of concerns I was hoping you could discuss, I am wondering if I have made the titles too simple.<br />1) I have no product code in the title<br />We have our own products manufactured and sell existing brands with their own product codes. Some of these can be lengthy. Adding them makes them hard to the eye and the page looked cramped.<br /><br />The codes are listed beneath each product title on category pages and on a list on the actual product page, but no where in the titles. <br /><br />2)None of our products have a brand listed in the title<br />None of the products on the site had brand names in anything but the images when i started and as such it snuck under my radar. But should i pre-fix all titles with a brand name?<br /><br />Should </p> <p>URL: domain.com/200g-precision-balance.html<br />Title: 200g Precision Balance</p> <p>become</p> <p>URL: domain.com/BRAND1-200g-precision-balance.html<br />Title: BRAND1 200g Precision Balance<br /><br />My instinct tells me to change things to include brands as its useful to the customer and should have an SEO benefit, but to leave out product codes as they are accessible to the customer where they are now and dont make things messy and unreadable.<br /><br />As always, thanks for the input!</p></title>
On-Page Optimization | | ATP0 -
Snippet showing as domain name with apostrophe, instead of page title when searching for the domain name.
Hi, We have an issue with one of our websites, with the snippet dispaying differently in Google serps when searching for the domain or the website name rather than a search term. When searching for a search term, the page title shows as expected, but when searching for the site by the domain name either with or without the tld, it shows the snippet as the domain name with an apostrophe at the end. Domain is subli.co.uk Thanks in advance for any advice!
On-Page Optimization | | K3v1n0 -
Image File Names for eCommerce?
Hi everyone! I'm wondering about naming my product photo file names for an E-Commerce site. Let's say I say have product named Abe Lincoln in the **Print **category for sale with 4 images, relatively similar but from different views for example.Could I name them as follows? 1) abe-lincoln-print.jpg 2) abe-lincoln-print-side-view.jpg 3) abe-lincoln-print-close-up.jpg 4) abe-lincoln-print-font-view.jpg Or is that too many keywords for the page? Should I be worried about keyword stuffing? Plus once I add in title and alt tags and descriptions this could also increase the keyword count for "abe lincoln print"?
On-Page Optimization | | TheFlyingSweetPotato0 -
How to separate your - keywords - and | Brand name in the Title Tag
I have traditionally used hyphens (-) and vertical bars (|) to separate out keywords/brands in title tags. A client has asked if other characters will work such as tilde (~), apersat (@), forward slash (/) etc. Are there any special characters we should steer clear of?
On-Page Optimization | | Switch_Digital0 -
Can I use Same Keyword for Multi pages Title Tags?
Hello All, I am working on client website and currently they are targeting One Keywords for multi pages. As I have search with Allintitle: Search query and Google display around 37 pages of website which carry same keyword in "Title Tags". I have told to client to change the "Title Tags" but they want that keyword for all relevant pages. So I want to know is that harm in Search Engine Ranking? Note: They have not done the link building activities for multi pages with same Keyword, they are using only in "Title Tags" only
On-Page Optimization | | jemindesai0 -
Avoiding "Duplicate Page Title" and "Duplicate Page Content" - Best Practices?
We have a website with a searchable database of recipes. You can search the database using an online form with dropdown options for: Course (starter, main, salad, etc)
On-Page Optimization | | smaavie
Cooking Method (fry, bake, boil, steam, etc)
Preparation Time (Under 30 min, 30min to 1 hour, Over 1 hour) Here are some examples of how URLs may look when searching for a recipe: find-a-recipe.php?course=starter
find-a-recipe.php?course=main&preperation-time=30min+to+1+hour
find-a-recipe.php?cooking-method=fry&preperation-time=over+1+hour There is also pagination of search results, so the URL could also have the variable "start", e.g. find-a-recipe.php?course=salad&start=30 There can be any combination of these variables, meaning there are hundreds of possible search results URL variations. This all works well on the site, however it gives multiple "Duplicate Page Title" and "Duplicate Page Content" errors when crawled by SEOmoz. I've seached online and found several possible solutions for this, such as: Setting canonical tag Adding these URL variables to Google Webmasters to tell Google to ignore them Change the Title tag in the head dynamically based on what URL variables are present However I am not sure which of these would be best. As far as I can tell the canonical tag should be used when you have the same page available at two seperate URLs, but this isn't the case here as the search results are always different. Adding these URL variables to Google webmasters won't fix the problem in other search engines, and will presumably continue to get these errors in our SEOmoz crawl reports. Changing the title tag each time can lead to very long title tags, and it doesn't address the problem of duplicate page content. I had hoped there would be a standard solution for problems like this, as I imagine others will have come across this before, but I cannot find the ideal solution. Any help would be much appreciated. Kind Regards5