Moz Q&A is closed.
After more than 13 years, and tens of thousands of questions, Moz Q&A closed on 12th December 2024. Whilst we’re not completely removing the content - many posts will still be possible to view - we have locked both new posts and new replies. More details here.
Canonical issues using Screaming Frog and other tools?
-
In the Directives tab within Screaming Frog, can anyone tell me what the difference between "canonicalised", "canonical", and "no canonical" means? They're found in the filter box. I see the data but am not sure how to interpret them. Which one of these would I check to find canonical issues within a website? Are there any other easy ways to identify canonical issues?
-
Hello
I spotted this thread and was just about to reply, but Dirk has answered it all perfectly. Thanks Dirk!
Under 'reports' there's also a 'canonical errors' report which will show canonicals with various technical issues - Those that are blocked by robots.txt, have no response, 3XX redirect, 4XX or 5XX error (essentially anything other than a 200 ‘OK’ response). It will also show any URLs discovered only via a canonical, that are not linked to internally from the sites own link structure (in the ‘unlinked’ column when ‘true’).
Hope that helps anyway.
Cheers!
Dan
-
Hi,
The difference between them
-
canonical : url has a canonical url - which can be self-referencing (canonical url = url) or not
-
canonicalised: url has a canonical url which is not self-referencing (canonical url <> url)
-
no canonical : quite obvious - the url has no canonical.
Potential issues could be - url's that you would like to have a canonical don't have a canonical or url's that are canonicalised don't have the right canonical url. You can use the lists (both canonicalised & no canonical) from Screaming Frog to check them - but it's up to you to judge whether the canonical is ok or not (no automated tool can guess what your intentions are).
Typical mistakes with canonicals: all url's have the same canonical url (like the homepage), or have canonical url's that do not exist. You could also check this with Screaming Frog using the setting "respect canonicals" - this way only the canonical url's will be shown in the listing.Also keep in mind that canonical url's are merely a friendly request to Google to index the canonical rather than the normal url - but it's not an obligation for Google to do this (check https://support.google.com/webmasters/answer/139066?hl=en quote: "the search results will be more likely to show users that URL structure. (Note: We attempt to respect this, but cannot guarantee this in all cases.)"
Dirk
-
Got a burning SEO question?
Subscribe to Moz Pro to gain full access to Q&A, answer questions, and ask your own.
Browse Questions
Explore more categories
-
Moz Tools
Chat with the community about the Moz tools.
-
SEO Tactics
Discuss the SEO process with fellow marketers
-
Community
Discuss industry events, jobs, and news!
-
Digital Marketing
Chat about tactics outside of SEO
-
Research & Trends
Dive into research and trends in the search industry.
-
Support
Connect on product support and feature requests.
Related Questions
-
Should we use Cloudflare
Hi all, we want to speed up our website (hosted in Wordpress, traffic around 450,000 page views monthly), we use lots of images. And we're wondering about setting up on Cloudflare, however after searching a bit in Google I have seen some people say the change in IP, or possible sharing of Its with bad neighbourhoods, can really hit search rankings. So, I was wondering what the latest thinking is on this subject, would the increased speed and local server locations be a boost for SEO, moreso than a potential loss of rankings for changing IP? Thanks!
Technical SEO | Jun 3, 2020, 2:20 AM | tiromedia1 -
Does using a canonical with ?utm_source=gmb cause any issues?
All of our URLs in Google My Business are tagged with ?utm_source=gmb. This way when people click on it within a Google Map listing, knowledge graph, etc we know it came from there. I'm assuming using a canonical on all ?_utm_source _pages (we have others, including some in the index) won't cause any problems with this, correct? Since they're not technically traditional organic SERPs? Dumb question I know, but better safe than sorry. Thanks.
Technical SEO | Aug 30, 2019, 8:24 AM | Alces1 -
If I'm using a compressed sitemap (sitemap.xml.gz) that's the URL that gets submitted to webmaster tools, correct?
I just want to verify that if a compressed sitemap file is being used, then the URL that gets submitted to Google, Bing, etc and the URL that's used in the robots.txt indicates that it's a compressed file. For example, "sitemap.xml.gz" -- thanks!
Technical SEO | Dec 3, 2017, 12:49 AM | jgresalfi0 -
Canonical Tag when using Ajax and PhantomJS
Hello, We have a site that is built using an AJAX application. We include the meta fragment tag in order to get a rendered page from PhantomJS. The URL that is rendered to google from PhantomJS then is www.oursite.com/?escaped_fragment= In the SERP google of course doesnt include the hashtag in the URL. So my question, with this setup, do i still need a canonical tag and if i do, would the canonical tag be the escaped fragment URL or the regular URL? Much Appreciated!
Technical SEO | Feb 27, 2015, 11:40 AM | RevanaDigitalSEO0 -
Using the Google Remove URL Tool to remove https pages
I have found a way to get a list of 'some' of my 180,000+ garbage URLs now, and I'm going through the tedious task of using the URL removal tool to put them in one at a time. Between that and my robots.txt file and the URL Parameters, I'm hoping to see some change each week. I have noticed when I put URL's starting with https:// in to the removal tool, it adds the http:// main URL at the front. For example, I add to the removal tool:- https://www.mydomain.com/blah.html?search_garbage_url_addition On the confirmation page, the URL actually shows as:- http://www.mydomain.com/https://www.mydomain.com/blah.html?search_garbage_url_addition I don't want to accidentally remove my main URL or cause problems. Is this the right way this should look? AND PART 2 OF MY QUESTION If you see the search description in Google for a page you want removed that says the following in the SERP results, should I still go to the trouble of putting in the removal request? www.domain.com/url.html?xsearch_... A description for this result is not available because of this site's robots.txt – learn more.
Technical SEO | Jul 9, 2014, 6:27 AM | sparrowdog1 -
Exclude status codes in Screaming Frog
I have a very large ecommerce site I'm trying to spider using screaming frog. Problem is I keep hanging even though I have turned off the high memory safeguard under configuration. The site has approximately 190,000 pages according to the results of a Google site: command. The site architecture is almost completely flat. Limiting the search by depth is a possiblity, but it will take quite a bit of manual labor as there are literally hundreds of directories one level below the root. There are many, many duplicate pages. I've been able to exclude some of them from being crawled using the exclude configuration parameters. There are thousands of redirects. I haven't been able to exclude those from the spider b/c they don't have a distinguishing character string in their URLs. Does anyone know how to exclude files using status codes? I know that would help. If it helps, the site is kodylighting.com. Thanks in advance for any guidance you can provide.
Technical SEO | Jan 26, 2014, 9:29 AM | DonnaDuncan0 -
Is there a pinging tool to ping all sites at once
hi, i am just wondering if there is a tool that you can put on your toolbar that allows you to ping all the sites at once. The last thing i want to keep doing is to go through every single one and ping my article. I would like to find a tool that does it all for me, can anyone let me know if there is one out there. many thanks
Technical SEO | Jul 6, 2012, 12:41 PM | ClaireH-1848860 -
Squarespace Duplicate Content Issues
My site is built through squarespace and when I ran the campaign in SEOmoz...its come up with all these errors saying duplicate content and duplicate page title for my blog portion. I've heard that canonical tags help with this but with squarespace its hard to add code to page level...only site wide is possible. Was curious if there's someone experienced in squarespace and SEO out there that can give some suggestions on how to resolve this problem? thanks
Technical SEO | Jul 16, 2017, 4:17 AM | cmjolley0