Moz Q&A is closed.
After more than 13 years, and tens of thousands of questions, Moz Q&A closed on 12th December 2024. Whilst we’re not completely removing the content - many posts will still be possible to view - we have locked both new posts and new replies. More details here.
Header Tags
-
Ok so I am writing different pages and the first heading is an H3 just because I wanted to it be a certain size. Then as you see the content, I have an H1 tag.
Example page: http://www.oxfordmshomes.net/condos/acadia-court-Oxford-MS
you can see that "Acadia First" is the first thing you see on the page and it uses an H3 element.
Long story short, my hierarchy is wrong. Does this have any negative effect on my SEO efforts?
-
Order of heading tags is important... use CSS to control size & tags other than headings!
Think of a HTML doc as you would any other academic document..
Animals
Cats
Red Cats
Pink Cats
Dogs
Round Dogs
Square Dogs
..you get the idea
-
You have links in your menu, that is enough.
as for you hierarchy, you should be ok, as a H1 is what it is, but if you don’t use a h1 SE will look for the first emphasized tag to use as a heading so its not conclusive.
Try using html5 to mark out your page.
I would use the hgroup and article tags.<hgroup class="title">
Perth SEO Company
Local SEO Perth Western Australia
</hgroup>
Blah blah blah
It is not sure if SE's are up to date on html5 yet, but they will do so,
make sure on the page specific content is in the article tag
-
ah yes. I did this because I wrote a page for every subdivision in my town. I don't really know a better way to do it. Any help would be greatly appreciated. I thought that It was always good to have a link to a page and not have the page just floating on the site with no links. Any help is greatly appreciated.
-
There must be 100 links commented out in your code... Here is an example... <a href="[http://www.oxfordmshomes.net/condos/a-southern-place-Oxford-MS](view-source:http://www.oxfordmshomes.net/condos/a-southern-place-Oxford-MS)" class="main"> <span>A SOUTHERN PLACEspan>a>li>
-
I'm not sure what you mean by link tags commented out? Do you just mean regarding under my subdivision tabs? Thanks Egol
-
The short answer... I don't know for sure.
Clarified answer... At the present time I do not believe that there is a huge difference in how Google and other search engines treats H1, H2 and H3. However, just to have things straight... I would make that
Acadia Court an H1. You can change the appearance using css.
You didn't ask but when I looked at the code of your page I was shocked to see so many link tags commented out. I would be getting rid of those if this was my site.
Got a burning SEO question?
Subscribe to Moz Pro to gain full access to Q&A, answer questions, and ask your own.
Browse Questions
Explore more categories
-
Moz Tools
Chat with the community about the Moz tools.
-
SEO Tactics
Discuss the SEO process with fellow marketers
-
Community
Discuss industry events, jobs, and news!
-
Digital Marketing
Chat about tactics outside of SEO
-
Research & Trends
Dive into research and trends in the search industry.
-
Support
Connect on product support and feature requests.
Related Questions
-
Unsolved Using NoIndex Tag instead of 410 Gone Code on Discontinued products?
Hello everyone, I am very new to SEO and I wanted to get some input & second opinions on a workaround I am planning to implement on our Shopify store. Any suggestions, thoughts, or insight you have are welcome & appreciated! For those who aren't aware, Shopify as a platform doesn't allow us to send a 410 Gone Code/Error under any circumstance. When you delete or archive a product/page, it becomes unavailable on the storefront. Unfortunately, the only thing Shopify natively allows me to do is set up a 301 redirect. So when we are forced to discontinue a product, customers currently get a 404 error when trying to go to that old URL. My planned workaround is to automatically detect when a product has been discontinued and add the NoIndex meta tag to the product page. The product page will stay up but be unavailable for purchase. I am also adjusting the LD+JSON to list the products availability as Discontinued instead of InStock/OutOfStock.
Technical SEO | | BakeryTech
Then I let the page sit for a few months so that crawlers have a chance to recrawl and remove the page from their indexes. I think that is how that works?
Once 3 or 6 months have passed, I plan on archiving the product followed by setting up a 301 redirect pointing to our internal search results page. The redirect will send the to search with a query aimed towards similar products. That should prevent people with open tabs, bookmarks and direct links to that page from receiving a 404 error. I do have Google Search Console setup and integrated with our site, but manually telling google to remove a page obviously only impacts their index. Will this work the way I think it will?
Will search engines remove the page from their indexes if I add the NoIndex meta tag after they have already been index?
Is there a better way I should implement this? P.S. For those wondering why I am not disallowing the page URL to the Robots.txt, Shopify won't allow me to call collection or product data from within the template that assembles the Robots.txt. So I can't automatically add product URLs to the list.0 -
Dynamic Canonical Tag for Search Results Filtering Page
Hi everyone, I run a website in the travel industry where most users land on a location page (e.g. domain.com/product/location, before performing a search by selecting dates and times. This then takes them to a pre filtered dynamic search results page with options for their selected location on a separate URL (e.g. /book/results). The /book/results page can only be accessed on our website by performing a search, and URL's with search parameters from this page have never been indexed in the past. We work with some large partners who use our booking engine who have recently started linking to these pre filtered search results pages. This is not being done on a large scale and at present we only have a couple of hundred of these search results pages indexed. I could easily add a noindex or self-referencing canonical tag to the /book/results page to remove them, however it’s been suggested that adding a dynamic canonical tag to our pre filtered results pages pointing to the location page (based on the location information in the query string) could be beneficial for the SEO of our location pages. This makes sense as the partner websites that link to our /book/results page are very high authority and any way that this could be passed to our location pages (which are our most important in terms of rankings) sounds good, however I have a couple of concerns. • Is using a dynamic canonical tag in this way considered spammy / manipulative? • Whilst all the content that appears on the pre filtered /book/results page is present on the static location page where the search initiates and which the canonical tag would point to, it is presented differently and there is a lot more content on the static location page that isn’t present on the /book/results page. Is this likely to see the canonical tag being ignored / link equity not being passed as hoped, and are there greater risks to this that I should be worried about? I can’t find many examples of other sites where this has been implemented but the closest would probably be booking.com. https://www.booking.com/searchresults.it.html?label=gen173nr-1FCAEoggI46AdIM1gEaFCIAQGYARS4ARfIAQzYAQHoAQH4AQuIAgGoAgO4ArajrpcGwAIB0gIkYmUxYjNlZWMtYWQzMi00NWJmLTk5NTItNzY1MzljZTVhOTk02AIG4AIB&sid=d4030ebf4f04bb7ddcb2b04d1bade521&dest_id=-2601889&dest_type=city& Canonical points to https://www.booking.com/city/gb/london.it.html In our scenario however there is a greater difference between the content on both pages (and booking.com have a load of search results pages indexed which is not what we’re looking for) Would be great to get any feedback on this before I rule it out. Thanks!
Technical SEO | | GAnalytics1 -
Adding Schema and No index tags via GTM
If we were to deploy schema and noindex tags to our website via Google tag manager, would these tags be viewed and respected by other search engines?
Technical SEO | | GregLB0 -
Removing a canonical tag from Pagination pages
Hello, Currently on our site we have the rel=prev/next markup for pagination along with a self pointing canonical via the Yoast Plugin. However, on page 2 of our paginated series, (there's only 2 pages currently), the canonical points to page one, rather than page 2. My understanding is that if you use a canonical on paginated pages it should point to a viewall page as opposed to page one. I also believe that you don't need to use both a canonical and the rel=prev/next markup, one or the other will do. As we use the markup I wanted to get rid of the canonical, would this be correct? For those who use the Yoast Plugin have you managed to get that to work? Thanks!
Technical SEO | | jessicarcf0 -
Product meta tags are not updating in my Magneto website!
I need some help! For some reason, each time I update the product meta tags in my Magento website, it doesn't change on the current website? Could someone help me understand why that is?
Technical SEO | | One2OneDigital0 -
Canonical tag for Home page: with or without / at the end???
Setting up canonical tags for an old site. I really need advice on that darn backslash / at the end of the homepage URL. We have incoming links to the homepage as http://www.mysite.com (without the backslash), and as http://www.mysite.com/ (with the backslash), and as http://www.mysite.com/index.html I know that there should be 301 redirects to just one version, but I need to know more about the canonical tags... Which should the canonical tag be??? (without the backslash) or (with the backslash) Thanks for your help! 🙂
Technical SEO | | GregB1230 -
Geotargeting duplicate content to different regions - href and canonical tag confusion
If you duplicate content onto a sub-folder for say a new US geotargeted site (to target kw spelling differences) and, in addition to GWT geotargeting settings, implement the 'Canonical' and 'Hreflang' tags on these new pages to show G different region and language version (en-us). Then does the original/main site similar pages also need to have canonical and href tags ? The main/original sites page I don't really want to target a specific country (although existing signals (hosting etc) will be UK (primary target of main site) but pages show up in other country searches too (which we want). Im presuming fine to leave the original/main site as it currently is although wording in google blog/webmaster central articles etc are a bit confusing hence why im asking for anyone elses opinion/input on this. Also is there are any benefit (or just best practice) to use 'www.example.com/en-us/...' in the subdirectory URL as opposed to just 'www.example.com/us/' many thanks in advance to any commentators 🙂
Technical SEO | | Dan-Lawrence0 -
URL query strings and canonical tag
Hi, I have recently been getting my comparison website redesigned and developed onto wordpress and the site is now 90% complete. Part of the redesign has meant that there are now dynamic urls in the format: http://www.mywebsite.com/10-pounds-productss/?display=cost&value=10 I have other pages similar to this but with different content for the different price ranges and these are linked to from the menus: http://www.mywebsite.com/20-pounds-products/?display=cost&value=20 Now my questions are: 1. I am using Joost's All-in-one SEO plugin and this adds a canonical tag to the page that is pointing to http://www.mywebsite.com/10-pounds-products/ which is the permalink. Is this OK as it is or should i change this to http://www.mywebsite.com/10-pounds-products/?display=cost&value=10 2. Which URL will get indexed, what gets shown as the display URL in the SERPs and what page will users land on? I'm a bit confused so apologies if these seem like silly questions. Thanks
Technical SEO | | bizarro10000