Using my Adwords budget
-
Hi,
I have a huge budget for adwords but I only seem to be using about 1/10 of it daily.
How to I go about using more budget but also keeping my conversion costs and % around the same?
And should each campaign have its own set of unique keywords? Should these keywords never appear in more than 1 campaign?
Any tips on maximising budget and increasing conversions would be great.
Thanks
-
Campaigns will often naturally not perform great at the beginning. It is just a risk you have to take when creating them, so yes your %'s may drop to start with, but once you start optimising that campaign and its been running a while it should pick up and start converting as your other campaigns do providing you're doing everything right.
one day is absolutely nothing. CTR'S, conversion rates and all kinds of PPC metrics can fluctuate HUGELY between only a few days. You need to let a campaign run for weeks before you fully assess what's going on. Obviously you should look at the campaign regularly to see if any keywords are seriously under performing (ie. Lots of impressions, few clicks and therefore a shocking CTR) and pause/delete these where appropriate, but otherwise you need to give them time.
In order to avoid huge upsets to your other campaign metrics, start you new campaigns off with only Exact match keywords. Then as you see which keywords start to perform well, change those to Phrase match and keep moving up in this fashion as this allows you to identify which keywords will perform without destroying your accounts CTR and QS by immediately throwing out lots of broad match terms. This kind of methodology has always worked well for me
Hope this helps.
-
Thanks.
The problem I have is, having taken on a client on 1st November, I have increased conversion % and decreased conversion cost. However I reduced the campaigns/ads running. So I only have 2 campaigns targeting their own product/service.
So as I reduced the campaigns, I also reduced the clicks and spend. Now what I have done is perfect but what I now need to do is add in new campaigns/ad groups looking at a different service. But I need these to maintain the %'s and conversion costs of the 2 I have running.
I dont want to add in new campaigns and it blows the good work I have done by upping cost on wasted clicks with no or little conversions.
I am worried that if I start a campaign and after 1 day the figures are poor, do I swtich it off or do I wait if I cam confident on my QS, ad look, keywords etc..?
How long should I give a campaign before saying "this isn't working"?
Thanks
-
Don't let your budget determine your strategy. I'm not a fan of spending money because you have it. I would focus on making sure that the clicks you are getting are actually turning into paying customers for the business and once you can confirm that the clicks are actually working for you, then you can scale up your campaign. But it can be done. I have a client campaign running that I spend $15,000 per month on and still maintain a >4.5% CTR. So don't let your budget decide your strategy, let what's working decide and scale it upward.
Giving specific advice on your campaign is tough because we don't know if it's a local campaign, product campaign, affiliate campaign, etc.
You asked, "And should each campaign have its own set of unique keywords? Should these keywords never appear in more than 1 campaign?"
Quick answer: 1. Campaigns should have adgroups that target their own niche and then those adgroups should have their own ads that target specific set of keywords. 2. I personally feel that if you do #1 right then keywords will not appear in multiple adgroups.
I like to build adgroups around 1 product and then ads based on keywords that are intuitive for that search and then I target each of those keywords with their own CPC. For instance, if I'm selling widgets I'll set up a campaign called widgets, an adgroup called blue widgets, and then have keywords like blue widgets, buy blue-green widgets, light blue widgets. I'll then try to target each of those keywords with their own CPC instead of setting the at the adgroup level. I also try to make sure that all my keywords in my ad groups are "phrase match" instead of broad or exact. And, like Sam mentioned, I negative keyword out keywords that don't relate to my strategy. For instance if you only sell new items, you could add the negative keywords -refurbished, -old, etc.
I don't use PPC like most pros however, I try to only target people who need "Now" things and keep the competitive shoppers to the organic side. This will generally help keep your cost down and conversions up. There are some tricks and things you can do in the title and text to help get only now shoppers. Also, enhanced campaigns in AdWords now get higher Quality Scores so I would definitely look into optimizing that along with each landing page you have on your own site.
Here is some information on enhanced campaigns from Google.
I'll repeat myself again, but let your goals decide what your strategy is and not your "lack of budget spending". I generally tell clients that I need $10,000 per month on a campaign but only spend roughly $7,000 or so. As your quality score and CTR increases, your CPC will go down. If you worked for me and weren't spending all of the budget I gave you and we were still meeting our goals, you'd be getting a bonus.
Hope that helps.
-
Hi there,
You will not always be able to get a higher volume of searches while maintaining the same CTR or costs.
To get more traffic, you should look at using more broad or modified broad match terms, however you must keep an eye on your negative keywords in order to maintain relevance. What keyword types are you currently using?
You should also keep doing keyword research, basically adding in more new keywords as you find them as this should expand your reach. You should also look at fully utilising ad extensions to help draw in that extra traffic.
Ad groups should have their own unique keywords as otherwise they will compete against each other, this also helps you maintain the adverts relevancy.
Let me know if you need further explanation/more help!
Sam
Got a burning SEO question?
Subscribe to Moz Pro to gain full access to Q&A, answer questions, and ask your own.
Browse Questions
Explore more categories
-
Moz Tools
Chat with the community about the Moz tools.
-
SEO Tactics
Discuss the SEO process with fellow marketers
-
Community
Discuss industry events, jobs, and news!
-
Digital Marketing
Chat about tactics outside of SEO
-
Research & Trends
Dive into research and trends in the search industry.
-
Support
Connect on product support and feature requests.
Related Questions
-
Adwords landing pages with no site links
Adwords best practices say to focus landing pages on conversions, with no navigational links to the rest of your website so they don't get distracted. However, now that Google Ads in the SERPs look so similar to organic results, visitors may click the ads instead of the organic result because that's what they see first. What is the risk of turning off these visitors who come to a landing page with a form, instead of a way to navigate through the rest of your site? Discussion question: Trade-offs between a form-focused landing page and providing navigation to the rest of the site?
Conversion Rate Optimization | | JannetteP1 -
Better use Google Analytics? This is for Conversion Rate Optimization purposes
Hi Moz-ers, I've had much help from the Moz community and hoping you can help me out on this one too. I would like to track everyone who visits our town listing pages. We operate much like ratings and reviews websites like tripadvisor and booking.com. What is the best way to track visitors coming to our listings pages only (for example tripadvisor shows top 10 hotels in London.) I would like Google Analytics on London and all other towns including Birmingham, Southampton ect... Is it possible to set up Google analytics to track this? These are our highest volume pages so having an idea of the traffic behaviour is crucial for SEO and Conversion Rate Optimization. As usual, looking forward to the advice we receive! Thanks,
Conversion Rate Optimization | | Eric_S
Eric0 -
Has anyone ever used Adwords' Forwarding Numbers as a Call Tracking Service?
Hi, I was taking over a client's Adwords account from a previous agency. It appears the former agency added the Google Forwarding Number (for call tracking on call extensions) and added it to the client's website. Therefore, if anyone calls that number from the website, it would register within Adwords (just not as a conversion but as a click under "call extensions") The problem: you can't filter by phone number (the same number calling +1 would indicate spam) you can filter by device (so tablet / computer) can be considered spam generally. Questions: Anyone ever used this before? Your thoughts? Does anyone know if there is spam coming from mobile devices now-a-days? Please tell me what I'm missing. Any advice / anyone else seen this / done this? Thanks Moz Community, Cole
Conversion Rate Optimization | | ColeLusby0 -
How to use a large budget
Hi All, This is more of an open discussion to gather some advice / strategy tips for a large spending client - so looking for some experts tips here. Potentially, there is a large client on the horizon, with a budget for 'SEO' starting at the 15k PM region. My question is- in what way would you personally begin to utilise this budget in absolute benefit of the client. What would you propose strategy-wise to begin with, what else would you incorporate along the line? How would you generate results not just from SEO, but from additional channels? PS - They have a separate budget for PPC. An open discussion and plenty of ideas would be fantastic.
Conversion Rate Optimization | | Webrevolve0 -
Google Adwords Quality Score Driving me I-N-S-A-N-E
Here's my issue, I have an Air Conditioning client for whom I've been managing their SEO and Adwords PPC for the past year. The SEO is going good, we are seeing tangible results every month will soon be on page 1 for their most competitive keyword. On the adwords side, we are having some major issues though and I'm racking my brain. We are somehow getting quality scores in the 2's and 3's on the regular. I've streamlined my campaigns down to the city and within those I've streamlined my keyword groups into the following groups: City (Campaign) - AIr Conditioning (keyword group) - AC Repair (keyword group) - Fix AC (keyword group) - Contractor (keyword group) - Air Conditioner (keyword group) Every keyword we're bidding on falls nicely into one of these keyword groups and we're putting about 10 key words in each. Landing pages have exact phrase match in page title, h1, bold words, contact form and a coupon image with all the meta tags indicating the image offer matches the offer in our ads. We are running 3-4 ads in each keyword and testing new ads almost daily. Still getting 2s and 3s on the highest trafficked keywords (air conditioning & ac repair). I've read everything out there, I signed up for wordstream which had some decent recommendations (basically break your ad groups into smaller verticals) which I've implemented to no avail. I'm beginning to think Google is just hustling all these companies in service industry who they know rely on adwords to get phone calls in the summer - especially the HVAC industry. I'm running out of ideas here other than just going to Vegas and putting all my client's on black at the roulette wheel. Seems like a much more fun way to piss away thousands of dollars and at least they'll give me some cocktails.
Conversion Rate Optimization | | BrianJGomez0 -
Can Adwords campaigns affect other campaigns performance?
I understand that keywords and adgroups within a campaign can affect the performance of other keywords within that parent campaign. I was interested to understand whether campaigns in my account can affect one another. I have an adwords account with around 30 campaigns. Some are heavy hitters and others get minimal to 0 traffic. Will these low quality campaigns drive up the costs of my high end campaigns?
Conversion Rate Optimization | | peigenesis0 -
Using overlay content on landing pages - possible? recommended?
We want to use an overlay, like a modal dialog, in a landing page to show more information to support conversion without linking to another page or using popups. Anyone have any stats on success or risks? We've considered simple roll-overs to provide some more info, but everyone has raised alarms that we may be introducing a potential technical or usability hurdle for users. The overlay would display when someone rolled over or clicked a "Learn More" link on the page to provide additional offer reinforcement points to drive the visitors from consideration to conversion. Aside from our own testing, we don't have any sources to cite as to whether this approach can or will impact or aid conversion. Any insights would be appreciated.
Conversion Rate Optimization | | lh27121 -
Is it advisable to use meta refresh for Google Website Optimiser?
We'd like to track conversions using Google's Website Optimiser, but the conversion page is hosted on a different sub domain so Google won't allow us to use this as the conversion page. The plan was then to add a blank page on the original domain that contains Google tracking code and a meta refresh to the page on the sub domain. We would then block this page in the robots file so Google doesn't try to index the page with the meta refresh. Does anyone see any harm that may come of this? Or any other way around the issue? Thanks in advance
Conversion Rate Optimization | | heatherrobinson0