SEOMoz Bug?
-
Hi--
I was using the SEOMoz toolbar, and I went to this page -
http://www.hark.com/clips/dxkdbdggyh-hes-totally-lucid-100-percent
and it says "zero" links from anywhere. However, it's clearly linked to from the home page -
Why would this be?
-
Ryan's right - it's because the page isn't in our index yet. You can verify this at www.opensiteexplorer.org. Sorry about that! Most new sites and links will be indexed by our spiders and available in Linkscape and Open Site Explorer within 60 days, but some take even longer for a plethora of reasons, including crawl-ability of sites, the amount of inbound links to them, and the depth of pages in subdirectories. Just so you know, here's how we do our index: we take the last index, take the 10 billion URLs with the highest mozrank (with a fixed limit on some of the larger domains), and start crawling from the top-down until we've crawled 40,000,000,000 pages (which is about 1/4 of the amount in Google's index). Therefore, if the site is not linked to by one of these seed URLs (or one of the URLs linked to by them in the next update) then it won't show up in our index
We update our Linkscape Index every 3 to 5 weeks. Crawling the whole internet to look for links takes 2-3 weeks. And then we've got 1-2 weeks of processing to do on those links to determine which are the most important links etc. You can see a schedule of how often we update, and planned updates here: http://seomoz.zendesk.com/entries/345964-linkscape-update-schedule
Linkscape focuses on a breadth-first approach, and thus we nearly always have content from the homepage of websites, externally linked-to pages and pages higher up in a site's information hierarchy. However, deep pages that are buried beneath many layers of navigation are sometimes missed and it may be several index updates before we catch all of these.
If our crawlers or data sources are blocked from reaching those URLs, they may not be included in our index (though links that points to those pages will still be available). Finally, the URLs seen by Linkscape must be linked-to by other documents on the web or our index will not include them.
For now, the best thing you can do to help your domain become indexed is to work on link building for links from sites with high mozrank.
I hope this helps! This is more of a customer service question than an SEO question, so in the future, if you have a question about our site or tools, please email it to help@seomoz.org to get faster service. Thank you David!
Best of luck.
-
Thanks for clarifying David. I now understand your question.
Using the SEOmoz toolbar's Analyze button, Link Data tab you are viewing the "Internal Followed Links" field and it shows as 0, when you clearly have links to your page.
The issue is the tool uses information from SEOmoz's monthly crawl of the web. SEOmoz only uses data from the top 25% of web pages on the internet. If the site you are looking at isn't very well linked and very popular, then you wont see the data you seek.
I don't like it at all and am seeking a better tool myself.
-
I think you may still be misunderstanding. I went to the page tab you showed, and here were the results:
| Internal Followed Links | 242 |
| Internal Nofollow Links | 2 |
| External Followed Links | 4 |
| External Nofollow Links | 1 |However, that's obviously measuring links on this page to other pages. I'm looking for links TO this page, to measure the success of this page, and it's all zeros. However, this is plainly not the case - there's a link from the home page to this page. That's the bug I'm talking about.
-
David, I am trying to help you here.
Please take another look at my initial reply.
-
-
That refers to EXTERNAL links, not internal ones.
Press the <analyze>button on your SEOmoz toolbar, then click to the Page Attributes tab as I mentioned above. There you will see the internal link information.</analyze>
-
I don't believe so - see the attached screen shot.
Right at the top, next to "PA" it says "0"
-
I believe you are looking at the Link Data tab which analyzes links TO the page you are viewing from other sources.
You want to look at the Page Attributes tab.
Got a burning SEO question?
Subscribe to Moz Pro to gain full access to Q&A, answer questions, and ask your own.
Browse Questions
Explore more categories
-
Moz Tools
Chat with the community about the Moz tools.
-
SEO Tactics
Discuss the SEO process with fellow marketers
-
Community
Discuss industry events, jobs, and news!
-
Digital Marketing
Chat about tactics outside of SEO
-
Research & Trends
Dive into research and trends in the search industry.
-
Support
Connect on product support and feature requests.
Related Questions
-
SEOMoz Crawling Errors
I recently implemented a blog using WordPress on our website. I didn't use WordPress as the CMS for the rest of our site just the blog portion. So as an example I installed Wordpress in http://www.mysite/blog/" not in the root. My error report in SEOMoz went from 0 to 22e. The Moz bot or crawler that SEOMoz uses is reporting a ton of 4xx errors to strang links that shouldn't exist anywhere on the site. Example: Good link - http://www.mysite/products.html Bad link reported by SEOMoz - http://www.mysite/blog/my-first-post/products.html I've also noticed that my page speed as become much slower as reported by Google. Does anybody know what could be happening here? I know that typically it's better to install WordPress in the root and use it to control the entire site but I was under the gun to get a blog out. Thanks
Technical SEO | | TRICORSystems0 -
Rel Canonical problem or SEOmoz bug ?
Hello all, I hope that sombody out there could help me with my question. I am very new in SEO and in SEOmoz community. I am not familiar with coding. I am goining to start learning soon enough but till now I now only basics. At the website where I am trying to optimize for SEO I am reciving this Crawl Diagnostic Programme. Issue: Rel Canonical (Notice) not Error I searched and lerned what it is. So I contact the developers of the website. Build in wordpress and ask them how to corrected ? They told me that they are using Canonical Tags to all their pages and have no idea why SEOmoz keep identifining it as a "notice" They also tel me to check the source code of page to see the canonical tag. I did and their is actuall a canonical tag there. Cjeck please here www.costanavarinogolf.com So do you have any idea why this is happening ? could you help me explaiin to developers what they should do to overcome this ? Or it's just a bug of SEOmoz and not a reall problem exist ? Thank you very much for your time
Technical SEO | | grzontan0 -
How to create GA Profile for SEOMoz
Hi ! I get this : Oh No! We did not find any Google Analytics profiles associated with this account. So I was wondering how to create GA Profiles for SEOMOZ. I'm admin of 3 websites in my GA accounts ... Thanks !
Technical SEO | | ovivo0 -
How can I prevent sh404SEF Anti-flood control from blocking SEOMoz?
I'm using sh404SEF on my Joomla 1.5 website. Last week, I activated the security functions of the tool, which includes an anti-flood control feature. This morning when I looked at my new crawl statistics in SEOMoz, I noticed a significant drop in the number of webpages crawled, and I'm attributing that to the security configurations that I made earlier in the week. I'm looking for a way to prevent this from happening so the next crawl is accurate. I was thinking of using sh404SEFs "UserAgent white list" feature. Does SEOMoz have a UserAgent string that I could try adding to my white list? Is this what you guys recommend as a solution to this problem?
Technical SEO | | JBradySD0 -
SERP Meta Dependant Upon Search Query (strange Google bug?)
Hi, I have on-page optimised a client's website Now take a look at the Title Tag & Meta description of the front page. This is the correct updates I have made - Title: Practice Management and Financial Consultants to the Health Industry
Technical SEO | | LukeyJamo
Description: Award winning Health and Life have been providing accounting, tax and practice management services for Medical, Dental, Allied Health businesses. Now, take a look when the business name is Googled. Notice how the Title Tag switches back to the original, yet the Description Tag is Correct. Now, take a look when the owner's name is Googled. The Title Tag is now correct, but the description is incorrect. Ive set the preferred URL to be the www version Ive spent ages in the custom CMS trying to find what could be causing this The developer says it's a "Google Thing" Anyone have any ideas?0 -
Differences between Lynx Viewer, Fetch as Googlebot and SEOMoz Googlebot Rendering
Three tools to render a site as Googlebot would see it: SEOMoz toolbar.
Technical SEO | | qlkasdjfw
Lynxviewer (http://www.yellowpipe.com/yis/tools/lynx/lynx_viewer.php )
Fetch as Googlebot. I have a website where I can see dropdown menus in regular browser rendering, Lynxviewer and Fetch as Googlebot. However, in the SEOMoz toolbar 'render as googlebot' tool, I am unable to see these dropdown menus when I have javascript disabled. Does this matter? Which of these tools is a better way to see how googlebot views your site?0 -
Follow up from http://www.seomoz.org/qa/discuss/52837/google-analytics
Ben, I have a follow up question from our previous discussion at http://www.seomoz.org/qa/discuss/52837/google-analytics To summarize, to implement what we need, we need to do three things: add GA code to the Darden page _gaq.push(['_setAccount', 'UA-12345-1']);_gaq.push(['_setAllowLinker', true]);_gaq.push(['_setDomainName', '.darden.virginia.edu']);_gaq.push(['_setAllowHash', false]);_gaq.push(['_trackPageview']); Change links on the Darden Page to look like http://www.darden.virginia.edu/web/MBA-for-Executives/ and [https://darden-admissions.symplicity.com/applicant](<a href=)">Apply Now and make into [https://darden-admissions.symplicity.com/applicant](<a href=)" > onclick="_gaq.push(['_link', 'https://darden-admissions.symplicity.com/applicant']); return false;">Apply Now Have symplicity add this code. _gaq.push(['_setAccount', 'UA-12345-1']);_gaq.push(['_setAllowLinker', true]);_gaq.push(['_setDomainName', '.symplicity.com']);_gaq.push(['_setAllowHash', false]);_gaq.push(['_trackPageview']); Due to our CMS system, it does not allow the user to add onClick to the link. So, we CANNOT add part 2) What will be the result if we have only 1) and 3) implemented? Will the data still be fed to GA account 'UA-12345-1'? If not, how can we get cross domain tracking if we cannot change the link code? Nick
Technical SEO | | Darden0