Moz Q&A is closed.
After more than 13 years, and tens of thousands of questions, Moz Q&A closed on 12th December 2024. Whilst we’re not completely removing the content - many posts will still be possible to view - we have locked both new posts and new replies. More details here.
Special characters in URL
-
Will registered trademark symbol within a URL be bad? I know some special characters are unsafe (#, >, etc.) but can not find anything that mentions registered trademark.
Thanks!
-
Jen - I agree with Eli. It's best not to use the TM symbol in a URL string - it will confuse the end user when it's URL encoded and scrambled. Rather, put the mark on your pages and in images.
If you have gone through the registration process with the USPTO (United States Patent and Trademark Office), you should be using the
symbol next to your mark, and not the TM symbol.
According to the Trademark FAQs on the USPTO site: http://www.uspto.gov/faq/trademarks.jsp#_Toc275426682
Do federal regulations govern the use of the designations "TM" or "SM" or the
symbol?
If you claim rights to use a mark, you may use the "TM" (trademark) or "SM" (service mark) designation to alert the public to your claim of a “common-law” mark. No registration is necessary to use a "TM" or "SM" symbol and you may continue to use these symbols even if the USPTO refuses to register your mark. Those symbols put people on notice that you claim rights in the mark, although common law doesn't give you all the rights and benefits of federal registration.
You may only use the federal registration symbol "
" after the USPTO actually registers a mark, not while an application is pending. And it may only be used on or in connection with the goods/services listed in the federal trademark registration and while the registration is still alive (you may not continue to use it if you don’t maintain the registration or it expires). Although there are no specific requirements on where the symbol should be placed relative to the mark, most businesses use the symbol in the upper right corner of the mark. Note: Because several foreign countries use “
” to indicate that a mark is registered in that country, use of the symbol by the holder of a foreign registration may be proper.
From another section_: There are no specific requirements on where the “
” symbol should be placed relative to the mark, but most businesses use the symbol in the upper right corner of the mark._
Hope this helps!
-- Jeff -
Jen,
I'm not sure if it will be bad based on research, but based on what you aim for in a URL (clarity, what the article is about, user experience, descriptive keywords, etc...) the TM Registered may not fit well.
Plus, be careful, your TM (if using symbols) will get changed to
(
) or
(
) in the URL - making it less user friendly to type in (let alone look at)..
Hope this Helps!
Eli Overbey
Got a burning SEO question?
Subscribe to Moz Pro to gain full access to Q&A, answer questions, and ask your own.
Browse Questions
Explore more categories
-
Moz Tools
Chat with the community about the Moz tools.
-
SEO Tactics
Discuss the SEO process with fellow marketers
-
Community
Discuss industry events, jobs, and news!
-
Digital Marketing
Chat about tactics outside of SEO
-
Research & Trends
Dive into research and trends in the search industry.
-
Support
Connect on product support and feature requests.
Related Questions
-
Appending a code at the end of a URL
Hi All, Some real estate/ news companies have a code appended to the end of a URL https://www.realestate.com.au/property-house-qld-ormiston-141747584 https://www.brisbanetimes.com.au/national/queensland/childcare-centre-could-face-prosecution-for-leaving-child-on-hot-bus-20230320-p5ctqs.html Can I ask if there's any negative SEO implications for doing this? Cheers Dave
Technical SEO | | Redooo0 -
Topic Cluster: URL Best Practices
I'm trying to be mature and employ the Topic Cluster strategy to my content. In doing so I realized there are a few URL options. Some more difficult to execute than others. -Is it important to call out the Pillar Topic in your subtopic URL?
Technical SEO | | dkellyagile
-Does the Pillar Topic need to have its own landing page? (As opposed to just being part of the blog.) Here's an Example: My Pillar is: Inbound vs. Outbound
My subtopic is: Marketing Platforms Here are the URL options I can think of... Option 1: https://pipelineinbound.com/blog/inbound-vs-outbound-marketing-platforms/ Option 2: https://pipelineinbound.com/blog/which-marketing-platforms/ Option 3: https://pipelineinbound.com/blog/marketing-platforms-inbound-vs-outbound/ Option 4 (Hardest): https://pipelineinbound.com/inbound-vs-outbound/marketing-platforms/ Are there some fundamental best practices for URL structure and Link Building as it pertains to Topic Clusters? Thanks!0 -
Backlinks that go to a redirected URL
Hey guys, just wondering, my client has 3 websites, 2 of 3 will be closed down and the domains will be permanently redirected to the 1 primary domain - however they have some high quality backlinks pointing the domains that will be redirected. How does this effective SEO? Domain One (primary - getting redesign and rebuilt) - not many backlinks
Technical SEO | | thinkLukeSEO
Domain Two (will redirect to Domain One) - has quality backlinks
Domain Three (will redirect to Domain One) - has quality backlinks When the new website is launched on Domain One I will contact the backlink providers and request they update their URL - i assume that would be the best.0 -
Bulk URL Removal in Webmaster Tools
One of Wordpress sites was hacked (for about 10 hours), and Google picked up 4000+ urls in the index. The site is fixed, but I'm stuck with all those urls in the index. All the urls of of the form: walkerorthodontics.com/index.php?online-payday-cash-loan.htmloncewe The only bulk removal option I could find was to remove an entire folder, but I can't do that, as it would only leave the homepage and kill off everything else. For some crazy reason, the removal tools doesn't support wildcards, so that obvious solution is right out. So, how do it get rid of 4000 results? And no, waiting around for them to 404 out of the index isn't an option.
Technical SEO | | MichaelGregory0 -
Duplicate Content and URL Capitalization
I have multiple URLs that SEOMoz is reporting as duplicate content. The reason is that there are characters in the URL that may, or may not, be capitalized depending on user input. A couple examples are: www.househitz.com/Pennsylvania/Houses-for-sale www.househitz.com/Pennsylvania/houses-for-sale www.househitz.com/Pennsylvania/Houses-for-rent www.househitz.com/Pennsylvania/houses-for-rent There are currently thousands of instances of this on the site. Is this something I should spend effort to try and resolve (may not be minor effort), or should I just ignore it and move on?
Technical SEO | | Jom0 -
Old URL redirect to New URL
Alright I did something dumb a year a go and I'm still paying for it. I changed my hyphenated URL to the non-hyphenated version when I redesigned my website. I say it was dumb because I lost most of my link juice even though I did 301 redirects (via the htaccess file) for almost all of the pages I could find in Google's index. Here's my problem. My new site took a huge hit in traffic (down 60%) when I made the change and even though I've done thousands of redirects my old site is still showing up in the SERPS and send much if not most of my traffic. I don't want to take the old site down in fear it will kill all of my traffic. What should I do? Is there a better method I should explore then 301 redirects? Could the other site be affecting my current rank since it's still there? (FYI...both sites are built on the WP platform). Any help or ideas are greatly appreciated. Thank you! Joe
Technical SEO | | kaje0 -
Cyrillic letter in URL - Encoding
Hi all We are launching our site in Russia. As far as I can see by searching Google all sites have URLs in latin letters. Is there a special reason for this? - It seems that cyrillic letters also work. My technical staff says that it might give some encoding problems. Can anyone give me some insight into this? Thanks in advance.. / Kenneth
Technical SEO | | Kennethskonto0 -
URL query strings and canonical tag
Hi, I have recently been getting my comparison website redesigned and developed onto wordpress and the site is now 90% complete. Part of the redesign has meant that there are now dynamic urls in the format: http://www.mywebsite.com/10-pounds-productss/?display=cost&value=10 I have other pages similar to this but with different content for the different price ranges and these are linked to from the menus: http://www.mywebsite.com/20-pounds-products/?display=cost&value=20 Now my questions are: 1. I am using Joost's All-in-one SEO plugin and this adds a canonical tag to the page that is pointing to http://www.mywebsite.com/10-pounds-products/ which is the permalink. Is this OK as it is or should i change this to http://www.mywebsite.com/10-pounds-products/?display=cost&value=10 2. Which URL will get indexed, what gets shown as the display URL in the SERPs and what page will users land on? I'm a bit confused so apologies if these seem like silly questions. Thanks
Technical SEO | | bizarro10000