Google Analytics Tracking Code Queries
-
Hello,
I have taken on a new client who has Google Analytics installed. The tracking code is set to 'single domain'. Recently they added a mobile site using a sub-domain (m.website.com) which means that Google Analytics is not picking up this traffic.
I want to revise the account so that I have a master account (raw data) and then profiles for the mobile site, main domain (www.website.com) and one other for a sub-domain that they are using. I am aware that there is mobile specific tracking code however I thought it would be easier (re conversions/goals/eCommerce tracking) to not use this and by changing the account to 'multiple domains' we could also get data for another sub-domain that they are using .
My questions are:
- Am I right to want to use individual profiles over web properties. If not please explain why.
- When installing the tracking code (where the profile number is changing) I believe that I need to add that code with the changing profile number to the sub-domain sections. So my question is a) is that correct, and b) if I use a profile number on a sub-domain section will the master account still gather the data for the main URL as well as all sub-domains.
- If I change the master account from using 'single domain' tracking code to 'multiple domain' tracking code will this affect historical data? Will I lose the data?
- When changing from 'single domain' tracking to 'multiple domain' tracking does this affect eCommerce tracking? Or do we only need to be adding the additional lines of tracking code that allow sub-domains to be tracked?
- The web developers are using asynchronous code however half is in the and the other half is at the bottom of the source code. Given that traffic is being reported in the Google Analytics account should I have any concerns that the code is split?
I have done a lot of reading but seem to be going around in circles, so your help is much appreciated!
Thanks,
Dinny -
Very helpful, thanks Mike!
-
-
Yes. Use individual profiles. Not web properties.
-
I would suggest using just one profile #. As you said you want to have a raw data, the main site, and the mobile profile. It's easy enough to use the same UA number for all three, then filter into 3 separate profiles.
-
No. In fact, you're actually not making any changes on Google's end by making that switch in the admin. That's really just a tool that generates a different code for you. It's all front-end. As long as you implement properly, you shouldn't lose any data to your main profile. Any new profiles that you create will, of course, start from scratch.
-
Yes and no. I'll explain below.
-
This isn't ideal, but isn't overly concerning. First of all, there is ZERO benefit to splitting the code. The async code does not block other code from loading, meaning it will have no effect on page load speed. By moving the whole code up into the head, you're just ensuring that the best, most honest data is being captured. Still, splitting the code is a common practice that yields fine results.
So, as I mentioned in answer three, I think you first have to understand that it's not a 'switch' in GA's admin that makes the change from single to multiple-domain. The only thing that actually changes in the admin is the way the snippet is written. And I'll tell you that the only thing that will change is that the _setDomain line will be added. So if you properly add this new line into your GA code, you'll be set up to capture all data into your raw profile. From there you can create your two separate profiles using the same UA code, with a custom filter based on the hostname.
Mike
-
Got a burning SEO question?
Subscribe to Moz Pro to gain full access to Q&A, answer questions, and ask your own.
Browse Questions
Explore more categories
-
Moz Tools
Chat with the community about the Moz tools.
-
SEO Tactics
Discuss the SEO process with fellow marketers
-
Community
Discuss industry events, jobs, and news!
-
Digital Marketing
Chat about tactics outside of SEO
-
Research & Trends
Dive into research and trends in the search industry.
-
Support
Connect on product support and feature requests.
Related Questions
-
Google Analytics Question - Impressions & Queries Up, Sessions Down
I'm working with a client who, according to the Google Query report, impressions and sessions are up since we've started work with them about 6 months ago, but Google sessions are down. In moz, we're seeing a gradual, but steady increase in search visibility specifically with Google. Note: this is all organic. From when we started tracking queries, the first month we were tracking there were 43,581 impressions and 690 click throughs for the month. This past month there were 98,293 queries and 1015 clicks throughs for the month (granted not year over year data) - of these 1,015 clicks, 995 of them were from web. However, for those same time periods, sessions from Google are down over 30% - 1,750 vs. 1,189. I'm not sure how to interpret this. I realize that clicks and sessions are not a straightforward comparison, but I would think that if clicks were up according to the query report that sessions would also be up. Is it that some of these clicks are bouncing and therefore not being tracked as a session? Is there a potential issue with how data is being tracked?
Reporting & Analytics | | Corporate_Communications0 -
Need help with excluding IP addresses in Google Analytics
In Google Analytics, are you able to add more than 1 IP address to an exclude filter? I found this article, http://www.creare.co.uk/filter-multiple-ip-addresses-in-google-analytics, but wasn't sure if it was the right way to do this or if I should create a new filter for each IP address. Also, when I try to create a new filter, it only will let me select from a list of profiles I have created whereas on other accounts I've been able to create several new filters without any problems. Does anyone know why this might be?
Reporting & Analytics | | jfeitlinger0 -
Best top 5 actionable insights from Google Analytics
Buongiorno from 14 degrees C cloudy wetherby UK 🙂 With a whole gamut of books out there are written around the topic of "Actionable Web analytics" where you have to wade through chapters of how to suck eggs and how to get analytics part of your business culture (whatever! most clients who look after their websites are entry level Marketing Execs who pay the digital agencies to do the thinking for them) I'd like to cut to the chase and list out say a top 5 of actionable insights a client would actually give the time of day for so heres my top five, whats yours? 1. Landing page bounce - showing them the £5k landing page designed with no conversion thinking is turning off customers
Reporting & Analytics | | Nightwing
2. Synching up PPC campaigns to analytics and showing them how much money they are waisting
3. Goal funnels - Showing them there 20 step shopping conversion funnel gets abandoned at step 3
4. Non brand keyword traffic (although a stack of this gets blocked by "not provided" Big groan...)
5. Event tracking on there 10 page carousel anner showing them no one clicks on banners 2 - 10 So under the strict label of "Actionable data only" from Google analytics whats your best insights you share with clients in the hope that they may actually give data reports the time of day! Grazie tanto,
David1 -
How to devide Google traffic into local google traffic (.com , .uk , .cn etc) in Analytics
Hi, friends In google analytics , we can see search traffic from google, but is it possible to deeply see from which local google? eg: .com , .uk, .hk etc? Thanks alots
Reporting & Analytics | | topchinaseo
Boson0 -
Cross domain tracking setup in Google Analytics
I really need help on this, I can't figure it out. I need to track a few subdomains and and couple of seperate domains in one profile in Google Analytics. So I have: www.maindomain.co.uk sub1.maindomain.co.uk sub2.maindomain.co.uk www.anotherdomain.co.uk So the code I have placed on all of these domains is as following: I have then set up seperate profiles which filter out the data by domain. E.g. for sub1.maindomain.co.uk, I have user the fitler: Custom filter > Include > Filter Field = Hostname > Filter Pattern = sub1.maindomain.co.uk For the www.anotherdomain.co.uk, I have used the same filter. Now this all seems to be tracking visits and unique visitors okay, but I always have a very low pageview count, less than visits and sometimes zero. Could anyone shed any light on what I am doing wrong? Thanks in advance mozzers.
Reporting & Analytics | | MirandaP0 -
How do I best segment tablets on Google Analytics
I would like to find a way to best segment out my tablet traffic to measure performance; however I'm finding that there are road blocks. It doesn't seem that device operating systems or screen resolutions have clear cut differences in the tablet/mobile versions. Has anyone here found a good way to create a "tablet" segment in Google Analytics? Right now I'm having to lean on solely the ipad traffic to get indicators of tablet performance. Thanks!
Reporting & Analytics | | lvstrickland0 -
Google Analytics Admin account not allowing us to add other users?
Our Google Analytics Administrator account is not giving us access to the User Manager, and because of that we are unable to add users; have you ever ran in to a problem such as this, if so what was your solution. Thanks a Billion impressions, Vijay E2qE9.jpg
Reporting & Analytics | | vijayvasu0 -
Setting up Google Analytic Goals to a 3rd Party Site
I recently received help on a question I asked on SEOmoz but need additional clarification. I am trying to set up goals in Google Analytics for people who click on a “purchase botton” which sends them to PayPal. I created a Thank You page and tried to get PayPal to redirect to it, however, our customers only get to our site’s 404 page. Here is what I’ve done so far: Went into my PayPal account and turned the “Auto Return” to ‘on’ Under website payment preferences, I added the following URL http://www.teecycle.org/thank-youutm_nooverride1. (I formatted the URL this way because the person who provided me with help recommended using the format ?UTM_nooverride=1. However, our CMS system won’t allow “?” or “=”)
Reporting & Analytics | | EricVallee340