Huge Analytics discrepancy when I turned off Analytics Module & Turned on GA via GTM
-
Hello,
I was running universal GA via a GA Drupal module. We setup Google Tag Manager and setup a GA tag to run through GTM. When we pushed the GTM container live our Real Time was at around 1900 and when we turned off the Drupal module the Real Time was reporting around 1100.
After 24 hours the sessions for that day were about 100k lower than what they usually are.
Any ideas Why the larger discrepancy? Any places that are obvious to look?
*I didn't setup the original Drupal GA module, nor do I know who did.
Thanks
-
Thanks, Dirk. I had the devs move the data layer above the GTM container snippet. The GA tag is still not firing on pages with a data layer and firing on pages without a data layer.
Obviously, it looks like there is an issue with the data layer -- I can't figure out what it is. I took a screen grab of the data layer in the source code.
-
Can only give you a theoretical answer - don't have that much experience with debugging the tag manager. From the "manual":
Data layer needs to be above the container snippet
Datalayer should be added above the container snippet. Variables pushed to the data layer after the container snippet will not be able to fire tags on page loads with a matching condition.
Variables pushed to the data layer after the container snippet will not be able to fire tags on page loads with a matching condition.
Move the datalayer to above the container snippetCheck also https://www.optimizesmart.com/google-tag-manager-data-layer-explained-like-never/ - it seems that you define your data layer after the position of the tag - so the tag cannot send the info from the data layer to Analytics. Check your source code & check where the data layer is defined. Probably it's ok on your category pages but not on the detail pages (compare both types to see the difference)
Hope this helps.
Dirk
-
Hey Dirk,
I checked the debugger and on the pages where the tag isn't firing the console isn't even acknowledging GTM.
The Tag Assistant is showing this error on pages where the GA tag is not firing: 'data layer needs to be above the container snippet.' Do you think this could be the issue?
I work with a journal site, and I notice that on landing pages the GA tag mostly fires correctly, but on article pages the tag doesn't fire and I get the 'data layer' error from tag assistant. e.x: the tag fires on /news but not on /news/some-random-article-from-today
-
Apart from the Tag manager assistant - you could also check the debugger -https://chrome.google.com/webstore/detail/google-analytics-debugger/jnkmfdileelhofjcijamephohjechhna?hl=en-US - like Martijn mentioned there should be an error somewhere - did you check the messages in the console?
-
That is possible, the coding is a mess. How could I see if there were or were not JavaScript errors on the page? And if there were, how to pinpoint which are interfering with my GA tag firing?
Thanks, Martijn!
-
Are you sure that there are no JavaScript errors on the page?
-
I found a subdirectory that the GA tag is not firing on though the GTM container is present.
When I use Debug, I get this message:
No tags were evaluated because there was no Event in the selected Message
I have no idea as to why the tag is not firing.
-
Hmm yeah that seems right to me!
-
Thanks, Dirk. I'm going to follow your suggestions.
Martijn, the track type id is 'pageview' and is set to fire on 'all pages'. For my Tag Firing Options I have selected 'once per event.'
Does that seem to be right?
-
What Dirk is suggesting would be the first thing to do in my opinion as well. But the second one is what trigger are you using in Google Tag Manager. Are you targeting all pages in there or something else?
-
Run Screaming Frog - and check if the tag id is present on all pages. Apart from checking - you could also extract the code from the source to double check that the ID is correct; check here how you can do this
In Analytics reporting (Behavior > Site Content > Content Drill down) set the day after migration & compare it to the day before migration - check if there if the drop is generic (=all pages) or linked to a few sections. If the drop is higher in specific sections - go down to next level & do the same. Check the pages with the highest traffic loss using the Tag Assistant plugin for Chrome. It checks if the tag is properly implemented on these pages (https://chrome.google.com/webstore/detail/tag-assistant-by-google/kejbdjndbnbjgmefkgdddjlbokphdefk)
You can also use the Tag Assistant plugin on your main pages to see if it is sending data as you would expect.
Hope this helps.
Dirk
Got a burning SEO question?
Subscribe to Moz Pro to gain full access to Q&A, answer questions, and ask your own.
Browse Questions
Explore more categories
-
Moz Tools
Chat with the community about the Moz tools.
-
SEO Tactics
Discuss the SEO process with fellow marketers
-
Community
Discuss industry events, jobs, and news!
-
Digital Marketing
Chat about tactics outside of SEO
-
Research & Trends
Dive into research and trends in the search industry.
-
Support
Connect on product support and feature requests.
Related Questions
-
Unsolved Google Analytics (GA4) recommendations for SEO analysis?
Guides on Moz and elsewhere mostly refer to Google Analytics' Universal Analytics (UA). However, UA is being replaced with GA4, and the interface, options, and reporting are very different. Can you recommend a clear, thorough, and effective walkthrough of how to set up useful SEO reports in GA4? Is there a simple tool you recommend that will help connect historical data from UA to GA4 when GA4 is the only option available? If there's no simple tool, what values do you recommend retaining from UA for effective historical reporting? How would you use them? At minimum for reporting, I'd want to show month-to-month changes and year-to-year changes (in percentages and in real numbers) for the following: all site visits all organic visits organic visits as a percentage of all site visits organic visits that led to a specific goal completion organic visits that led to any goal completion Thanks in advance for your help!
Reporting & Analytics | | Kevin_P1 -
Funnel Problem in Google Analytics - Please help
Hello, I did set up a several funnel steps in my analytics account to get the funnel visualization report. But it's look fishy, something's clearly wrong that it shows only 10 visitors at the first step but actually more than 5k visitors has visited first goal page and followed through the another all steps. Everyday we are receiving 5k to 10k goal conversions but it not showing in the entire funnel steps through first step to last step. Please see the attached screenshot URL for funnel setup (Admin) and funnel visualization report comparing last two months traffic. Total goal conversions received 3,605 in last two months but in funnel chart (report) it showing only 2% conversions in last step. Anybody can tell me what is the problem with that or analytics not tracking properly?si65Y
Reporting & Analytics | | flightcentre200 -
Two Analytics Code
Hi Moz Community! I've been working with a client’s website and found it has 2 analytics code with same ID. I need to understand which one is correct before removing anyone of them, below are the both scripts. First one Second one Any help would be appreciated! Regards, S
Reporting & Analytics | | ShaunPhilips0 -
Mismatch between analytics and webmaster tools
Hi, I've noticed that the Queries report in analytics gives a completely different answer (for impressions, clicks, CTR, Avg. position) to webmaster tools. What gives? Which would you use? Thanks, Amelia
Reporting & Analytics | | CommT0 -
Problem setting up new view in Analytics
Hi, I'm having problems finding where to set up a new view in Analytics. I have seen https://support.google.com/analytics/answer/1009714?hl=en but get lost at point 3 (In the View column, click the menu, then click Create new view.) In the menu there is no option that I can see. If I go into the one view that is set up, I also can't see anything 'View Settings' that would allow me to copy the view and then modify it. Am I missing something? Thanks
Reporting & Analytics | | Houses0 -
Does Google Analytics parse visits from search apps?
Does anyone know if Google Analytics reports visits to your website differently from individual search apps like Google and Bing? Or do they just treat them the same as any other keyword visit from Google or Bing search engine? I suppose the end result is probably the same as in the Google app you're using Google so it would just be a different access point versus a new tool. I'm just curious if there is a way to see how many Mobile visits are coming from the apps vs the browser. For me personally I have the Google and Bing iOS apps installed but rarely use them, opting for the Safari search bar 99% of the time.
Reporting & Analytics | | nsauser0 -
Setting up GA to report on sub domains
I've just launched a mobile version of my site at m.mydomain.com. I could do with a bit of help just checking I've inserted my Google Analytics code correctly though. I've chosen the sub domain option from settings and pasted the code into both the mobile and the non-mobile version of my sites. However, am I right in thinking that the setDomain attribute should point to two different domains for example: _gaq.push(['_setDomainName', 'm.mydomain.com']); (for the mobile site) and: _gaq.push(['_setDomainName', 'mydomain.com']); (for the standard site) Thanks very much for your help!
Reporting & Analytics | | theshortstack0 -
Analytics
Is there a way to find out how traffic is spread by the hour i.e 1am-2am 2am-3am etc.. with GA?
Reporting & Analytics | | PeterM220