Huge Analytics discrepancy when I turned off Analytics Module & Turned on GA via GTM
-
Hello,
I was running universal GA via a GA Drupal module. We setup Google Tag Manager and setup a GA tag to run through GTM. When we pushed the GTM container live our Real Time was at around 1900 and when we turned off the Drupal module the Real Time was reporting around 1100.
After 24 hours the sessions for that day were about 100k lower than what they usually are.
Any ideas Why the larger discrepancy? Any places that are obvious to look?
*I didn't setup the original Drupal GA module, nor do I know who did.
Thanks
-
Thanks, Dirk. I had the devs move the data layer above the GTM container snippet. The GA tag is still not firing on pages with a data layer and firing on pages without a data layer.
Obviously, it looks like there is an issue with the data layer -- I can't figure out what it is. I took a screen grab of the data layer in the source code.
-
Can only give you a theoretical answer - don't have that much experience with debugging the tag manager. From the "manual":
Data layer needs to be above the container snippet
Datalayer should be added above the container snippet. Variables pushed to the data layer after the container snippet will not be able to fire tags on page loads with a matching condition.
Variables pushed to the data layer after the container snippet will not be able to fire tags on page loads with a matching condition.
Move the datalayer to above the container snippetCheck also https://www.optimizesmart.com/google-tag-manager-data-layer-explained-like-never/ - it seems that you define your data layer after the position of the tag - so the tag cannot send the info from the data layer to Analytics. Check your source code & check where the data layer is defined. Probably it's ok on your category pages but not on the detail pages (compare both types to see the difference)
Hope this helps.
Dirk
-
Hey Dirk,
I checked the debugger and on the pages where the tag isn't firing the console isn't even acknowledging GTM.
The Tag Assistant is showing this error on pages where the GA tag is not firing: 'data layer needs to be above the container snippet.' Do you think this could be the issue?
I work with a journal site, and I notice that on landing pages the GA tag mostly fires correctly, but on article pages the tag doesn't fire and I get the 'data layer' error from tag assistant. e.x: the tag fires on /news but not on /news/some-random-article-from-today
-
Apart from the Tag manager assistant - you could also check the debugger -https://chrome.google.com/webstore/detail/google-analytics-debugger/jnkmfdileelhofjcijamephohjechhna?hl=en-US - like Martijn mentioned there should be an error somewhere - did you check the messages in the console?
-
That is possible, the coding is a mess. How could I see if there were or were not JavaScript errors on the page? And if there were, how to pinpoint which are interfering with my GA tag firing?
Thanks, Martijn!
-
Are you sure that there are no JavaScript errors on the page?
-
I found a subdirectory that the GA tag is not firing on though the GTM container is present.
When I use Debug, I get this message:
No tags were evaluated because there was no Event in the selected Message
I have no idea as to why the tag is not firing.
-
Hmm yeah that seems right to me!
-
Thanks, Dirk. I'm going to follow your suggestions.
Martijn, the track type id is 'pageview' and is set to fire on 'all pages'. For my Tag Firing Options I have selected 'once per event.'
Does that seem to be right?
-
What Dirk is suggesting would be the first thing to do in my opinion as well. But the second one is what trigger are you using in Google Tag Manager. Are you targeting all pages in there or something else?
-
Run Screaming Frog - and check if the tag id is present on all pages. Apart from checking - you could also extract the code from the source to double check that the ID is correct; check here how you can do this
In Analytics reporting (Behavior > Site Content > Content Drill down) set the day after migration & compare it to the day before migration - check if there if the drop is generic (=all pages) or linked to a few sections. If the drop is higher in specific sections - go down to next level & do the same. Check the pages with the highest traffic loss using the Tag Assistant plugin for Chrome. It checks if the tag is properly implemented on these pages (https://chrome.google.com/webstore/detail/tag-assistant-by-google/kejbdjndbnbjgmefkgdddjlbokphdefk)
You can also use the Tag Assistant plugin on your main pages to see if it is sending data as you would expect.
Hope this helps.
Dirk
Got a burning SEO question?
Subscribe to Moz Pro to gain full access to Q&A, answer questions, and ask your own.
Browse Questions
Explore more categories
-
Moz Tools
Chat with the community about the Moz tools.
-
SEO Tactics
Discuss the SEO process with fellow marketers
-
Community
Discuss industry events, jobs, and news!
-
Digital Marketing
Chat about tactics outside of SEO
-
Research & Trends
Dive into research and trends in the search industry.
-
Support
Connect on product support and feature requests.
Related Questions
-
Google Analytics, Wordpress, Sumo - who to trust
Something is wrong. I have a website that according to Google Analytics gets zero relevant clicks, with most of the clicks it does get coming from Russia. Wordpress says it gets a hundred or so visitors a month, with most traffic going to the pages that I know rank. Sumo says the heat map got 76 clicks. How would you figure out what's really going on?
Reporting & Analytics | | julie-getonthemap0 -
Huge Spike in Direct Traffic from IE7
Our site is seeing a huge spike in direct (none) traffic from IE 7 from July 8, 2014 - on. June 25 - July 7 showed 21 direct visits from IE 7; July 8 - July 20 is showing 5,889 (an increase of 27,943%). All traffic from the spike is going to our homepage. Other Google Analytics' stats for this direct (none) IE 7 traffic: Bounce Rate: 99.52%
Reporting & Analytics | | SJVC_Susie
Avg. Session Duration: 0:02
Pages/session: 1.01
Mostly all new users What's strange is that the traffic is from a variety of cities and networks. What could be causing this? Has anyone experienced this before?0 -
What's the problem with this code for Google Analytics
Hello, I'm using this code in my thank you page to track ecommerce sales in GA. The problem that I'm having is that in the google event the _trackPageview doesn't register the proper page but puts the url of the ecommerce website. The transaction is properly tracked. Any ideas of what could be the issue looking at this code? Maybe there could be other code could be causing the problem? Thanks a lot.
Reporting & Analytics | | nagar0 -
Google analytics vs Webmaster tools data
Hi Which is more accurate WT or GA data ? Since GA reporting a KW (thats very recently fallen from page 1 to 3 hence looking into data to find the cause) in the Organic part of Search tab as having generated just 1 visitor over a month (hence presuming fall could be due to low visits from a page 1 result) whilst under Search Engine Optimisation tab (data sourced from WT i think) its reporting 5 click thrus from 150 impressions over same period resulting in a quite good 3.33% CTR (hence wouldn't expect to be the cause of a fall) and what i would have thought GA would report as 5 visits instead of the 1 they do report !? The reason im looking for answer in the data is because no on-page has changed and still scoring a grade A and off page metrics have all improved across the board (apart from small drop in majseo's Trust Flow) such as increased links, RD, Citation Flow, Ref Subnets etc etc etc Cheers Dan
Reporting & Analytics | | Dan-Lawrence0 -
How to not track mobile redirects in Google Analytics
If a user is on a mobile device and comes to our home page, http://www.darden.virginia.edu/web/Home/ they are redirected to http://m.darden.virginia.edu/web/Home/. We want a way to remove all the redirects from our Google analytics reports. More specifically we do not want to include the the page view of http://www.darden.virginia.edu/web/Home/ in our page view count when the user is on a mobile device. How do we do that?
Reporting & Analytics | | Darden0 -
Why is GG analytics showing so much (not provided)?
is there a better analytics tool (preferably free) that will show the actual keywords that drive traffic to a website or are we doomed to deal with (not provided) as a result of the Big G's retarded privacy policy? - seems they cant make up their minds as to whether they are going to take care of site owners or advertisers - but they should really take a stand and stop putting out half-ass results if anyone has any helpful ideas that may ease my pain i would be forever in your debt.
Reporting & Analytics | | Ezpro90 -
Keyword referrals in GA
Hi chaps, Quick question for you. I'm drilling down in GA to one of our eCommerce pages which has a pretty high bounce rate. I'm looking at referring keywords and they don't seem to make much sense. The page I'm looking at is a pretty deep page but the top referring keywords are all branded terms. The page isn't included in our site links. To explain a little further, this is the scenario I think is happening: User searches using "Brand term". They then click through to our homepage and eventually land on the deep shopping page (on a different subdomain) In GA Content > Site Content > Pages > Primary dimension set to keyword - "Brand term" shows as the referring keyword. Does this sound right? We have a custom GA script set up to track multiple subdomains.
Reporting & Analytics | | Confetti_Wedding0 -
Setting up GA to report on sub domains
I've just launched a mobile version of my site at m.mydomain.com. I could do with a bit of help just checking I've inserted my Google Analytics code correctly though. I've chosen the sub domain option from settings and pasted the code into both the mobile and the non-mobile version of my sites. However, am I right in thinking that the setDomain attribute should point to two different domains for example: _gaq.push(['_setDomainName', 'm.mydomain.com']); (for the mobile site) and: _gaq.push(['_setDomainName', 'mydomain.com']); (for the standard site) Thanks very much for your help!
Reporting & Analytics | | theshortstack0